HP各种机型面板信息汇总(7)

printer returns to the Ready state after approximately 10 seconds.

GENUINE HP SUPPLIES DESIGNED FOR This genuine HP supply was not designed for Replace this supply with a genuine HP

this printer and is not supported. The printer

can use it, but print quality might be affected.

Group dial not allowed in group

The speed-dial code that you typed is programmed Add one-touch buttons (programmed as an for a group. Adding a group-dial to another group-dial is not allowed.

HP supplies installed

individual speed dial) or speed-dial codes to a group-dial.

supply that is designed for this printer.

The printer transitioned from having one or more No action required. non-HP supplies to having all HP supplies installed.

Incorrect INFLATE FAILURE

The PIN number is incorrect.

An error has occurred during a firmware upgrade.

Contact the network administrator. Reinstall the firmware.

Initializing This message appears when the printer is turned on.

No action necessary.

Initializing permanent storage This message appears when the printer is

turned on.

INSERT OR CLOSE TRAY XX

No action necessary.

A tray is open and the printer is trying to Close the tray indicated so that print from another tray.

printing can continue. 1. 2. 3. 4. 5.

Press▼ to see step-by-step information. Open the top cover.

Install the print cartridge. Close the top cover. Press ？to exit.

INSTALL BLACK CARTRIDGE The print cartridge is not installed correctly.

INSTALL FUSER The fuser is either not installed or not correctly installed in the printer.

Press ？ for help.

Install supplies

The supplies gauge will display the consumption levels of print cartridges.

Multiple supplies are not installed. Install correct print cartridges.

INSTALL TRANSFER UNIT The transfer unit is either not installed is defective, the high-voltage power supply connection to the transfer unit is defective, or the DC controller PCB is Defective.

1. Press ？ for help.

Ensure the transfer unit is fully seated, that the contracts are not damaged. See Transfer unit removal (in chapter 6) for more information.

or not correctly installed in the printer, 2.

3. 4.

Replace the transfer unit. Replace the high-voltage power supply PCB.

第 31 页 共 43 页

5. Replace the DC controller PCB.

INSUFFICIENT MEMORY TO LOAD FONTS/DATA

This message alternates with the name of the Press√ to continue printing without storage device that does not have enough memory to load the fonts or other data.

using the data.

To solve the problem, increase the amount of memory for the device. Press ？ for more information.

Invalid date Invalid driver

An invalid date was entered, such as June 35. You are using the incorrect printer driver.

Re-enter the date.

Reselect the printer driver appropriate for your device.

Invalid entry

Jam in Cartridge area

Invalid data or response.

A jam has occurred in the print path.

Correct the entry.

Open the door and clear the jam. Then press the √ (Select) button on the control panel.

Jam in Output bin

Jam in print paper path

A jam has occurred in the output area. Clear the jam, and then press the √ (Select) button on the control panel.

A jam has occurred in the print path. Open the door and clear the jam. Then press the √(Select) button on the control panel.

Jam in tray 2 A jam has occurred in Tray 2. Clear the jam, and then press the √ (Select) button on the control panel.

Jam in tray 3 A jam has occurred in Tray 3. Clear the jam, and then press the √ Select) button on the control panel.

Load paper The HP Color LaserJet 2605, 2605dn, or 2605dtn printer is out of paper.

Please load specified paper type into the tray indicated.

LOAD TRAY X alternates with For help press ？

LOAD TRAY X alternates with

To use another tray press √ LOAD TRAY XX alternates with

MOVE TRAY DIAL TO CUSTOM

Tray X is either empty or configured for a Press ？for help. type and size other than that specified in the job. No other tray is available.

Tray X is either empty or configured for a Press ？for help.

type and size other than that specified in the Or Press√ to print from another tray. job.

The tray dial needs to be set to custom.

1. 2. 3. 4. 5.

Press▼ to see step-by-step information.

Load the tray with the requested media.

Verify the guides are in the correct position.

Adjust the tray dial and blue lever to the custom position. Press？ to exit.

Press ▼to see step-by-step information. 2. 3.

Load the tray with the requested media.

Verify the guides are in the

LOAD TRAY XX - MOVE The tray dial needs to be set to paper size 1. TRAY DIAL WHEN LOADING TRAY

in use.

第 32 页 共 43 页

correct position. 4. 5.

Loading program X alternates with DO NOT POWER OFF

Programs and fonts can be stored on the printer file system and are loaded into RAM when the printer is turned on. The X specifies the sequence number of the program being loaded.

Manual feed Press √

The printer is waiting for paper in the tray indicated.

Load the paper as indicated.

Adjust the tray dial and blue lever to the correct position. Press？ to exit.

No action necessary.

MANUALLY FEED alternates with For help press ？

MANUALLY FEED alternates with To continue press √ MANUALLY FEED alternates with

To use another tray press √ MANUALLY FEED OUTPUT STACK alternates with

Tra …… 此处隐藏：9206字，全部文档内容请下载后查看。喜欢就下载吧 ……