Coilcraft线艺电感0603HL系列选型手册

Coilcraft线艺电感0603HL系列选型手册由深圳市捷比信科技有限公司整理发布。 Coilcraft 0603HL系列电感比其他0603电感的电感值高

Chip Inductors – 0603HL Series (1608)

Document 894-1

? Higher inductance values than other 0603 inductors ? Inductance range: 330 nH – 3.3 µH

Inductance 2 SRF typ 4 DCR max 5 I rms 6 Color

Part number 1

±5% (nH)

Q typ 3

(MHz) (Ohms)

(mA) code 7

0603HL-331XJR_

330 @ 25 MHz 13 @ 25 MHz 420 0.970 330 Violet 0603HL-391XJR_ 390 @ 25 MHz 13 @ 25 MHz 400 1.05 330 G ray 0603HL-471XJR_ 470 @ 25 MHz 12 @ 25 MHz 200 1.15 300 White 0603HL-511XJR_ 510 @ 25 MHz 12 @ 25 MHz 340 1.20 300 Black 0603HL-561XJR_ 560 @ 25 MHz 12 @ 25 MHz 330 1.35 300 Brown 0603HL-681XJR_ 680 @ 25 MHz 12 @ 25 MHz 310 1.80 260 Red 0603HL-821XJR_ 820 @ 25 MHz 14 @ 25 MHz 290 2.45 190 Orange 0603HL-102XJR_ 1000 @ 25 MHz 14 @ 25 MHz 250 2.80 190 Y ellow 0603HL-122XJR_ 1200 @ 25 MHz 14 @ 25 MHz 230 3.20 180 G reen 0603HL-152XJR_ 1500 @ 25 MHz 15 @ 25 MHz 190 4.10 150 Blue 0603HL-182XJR_ 1800 @ 25 MHz 16 @ 25 MHz 180 5.30 140 Violet 0603HL-222XJR_ 2200 @ 25 MHz 16 @ 25 MHz 165 5.90 130 G ray 0603HL-272XJR_ 2700 @ 25 MHz 16 @ 25 MHz 150 7.00 120 White 0603HL-332XJR_ 3300 @ 25 MHz 18 @ 25 MHz 135 9.10 110 Black

1. When ordering, please specify termination

and packaging code:0603HL-332XJ RC

Termination: R = RoHS compliant matte tin over nickel over silver-platinum-glass frit

Special order: Q = RoHS tin-silver-copper (95.5/4/0.5) or P = non-RoHS tin-lead (63/37).

Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic

tape (2000 parts per full reel).

B = Less than full reel. In tape, but not machine ready.

To have a leader and trailer added ($25 charge), use code letter C instead.

2. Inductance measured at 0.1 V rms, using a Coilcraft SMD-A fixture in Agilent/HP 4287A impedance analyzer or equivalent with Coilcraft-provided correlation pieces.

3. Q measured using a Coilcraft SMD-A fixture in Agilent/HP 4287A impedance analyzer or equivalent.

4. SRF measured using Agilent/HP 8753D network analyzer with Coilcraft SMD-D test fixture.

5. DCR measured on Cambridge T echnology Micro-ohmmeter or equivalent.

6. Current that causes a 15°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings.

7. Each part is marked with a single dot. T he color dots are not unique identifiers and correspond to multiple inductance values.8. Electrical specifications at 25°C.

Refer to Doc 362 “Soldering Surface Mount Components” before soldering.

Designer’s Kit C449 contains 10 of each value Core material Ceramic

Environmental RoHS compliant without exemption, halogen free Terminations RoHS compliant matte tin over nickel over silver-plati-num-glass frit. Other terminations available at additional cost.Weight 3.2 – 4.4 mg

Ambient temperature –40°C to +125°C with I rms current Maximum part temperature +140°C (ambient + temp rise).Storage temperature Component: –40°C to +140°C. Tape & reel packaging: –40°C to +80°C

Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles

Temperature Coefficient of Inductance (TCL) +50 to +150 ppm/°C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity)

Failures in Time (FIT) / Mean Time Between Failures (MTBF) One per billion hours / one billion hours, calculated per Telcordia SR-332Packaging 2000 per 7″ reel. Plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 1.0 mm pocket depth PCB washing T ested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf .

Document 894-1 Revised 10/12/15

深圳捷比信－－高品质精密元件供应商

ｗｗｗ．ｊｅｐｓｕｎ．ｃｏｍ

Coilcraft线艺电感0603HL系列选型手册由深圳市捷比信科技有限公司整理发布。 Coilcraft 0603HL系列电感比其他0603电感的电感值高

Document 894-2

Document 894-2 Revised 10/12/15

Chip Inductors – 0603HL Series

Typical L vs Frequency

A B C m ax max max D E F G H I J 0.071 0.047 0.037 0.010 0.030 0.011 0.038 0.040 0.025 0.025 inches 1,80 1,19 0,94 0,25 0,76 0,28 0,97 1,02 0,64 0,64 mm Typical Impedance vs Frequency

100

1000

10,000

I n d u c t a n c e (n H )

Frequency (MHz)0

10

5

15

2520

Q F a c t o r

Frequency (MHz)

0.01

0.1

1

100

10

I m p e d a n c e (k O h m s )

Frequency (MHz)

Land Pattern

approx 0.01/0,25 both ends

Note: Height dimension (C) is before optional solder application. For maximum

height dimension including solder, add 0.006 in / 0,152 mm.

深圳捷比信－－高品质精密元件供应商

ｗｗｗ．ｊｅｐｓｕｎ．ｃｏｍ