T430HVN01.0 SKD product final spec_v1.3_LBC_20140909(3)

AUO T430HVN01.0 SKD CELL液晶玻璃规格书

T430HVN01.0 Product Specification Rev 1.3Tv Tblk(v) Th DE Tdisp(v)M pixelRGB DataInvalid DataLine NLine 1Line 2Line 3Line 4Line NInvalid DataN L in eCLK Tclk Th Tdisp(h) DETblk(h)CH1Pixel M-7Pixel M-5Pixel M-3Pixel M-1Invalid DataPixel 1Pixel 3Pixel 5Pixel 7Pixel 9Pixel 11Pixel M-5Pixel M-3Pixel M-1Invalid DataPixel 1Pixel 3CH2Pixel M-6Pixel M-4Pixel M-2Pixel MInvalid DataPixel 2Pixel 4Pixel 6Pixel 8Pixel 10Pixel 12Pixel M-4Pixel M-2Pixel MInvalid DataPixel 2Pixel 4© Copyright AU Optronics Corp. 2014 All Rights Reserved.3.3 Signal Timing WaveformsPage 16 / 29

AUO T430HVN01.0 SKD CELL液晶玻璃规格书

T430HVN01.0 Product Specification Rev 1.33.4 Color Input Data ReferenceThe brightness of each primary color (red, green and blue) is based on the 8 bit gray scale data input for the color; the higher the binary input, the brighter the color. The table below provides a reference for color versus data input.COLOR DATA REFERENCEInput Color Data Color RED MSB LSB MSB GREEN LSB MSB BLUE LSBR7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0 Black Red(255) Green(255) Basic Color Blue(255) Cyan Magenta Yellow White RED(000) RED(001) R ---RED(254) RED(255) GREEN(000) GREEN(001) G ---GREEN(254) GREEN(255) BLUE(000) BLUE(001) B ---BLUE(254) BLUE(255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 1 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 1 1 1 0 1 0 0© Copyright AU Optronics Corp. 2014 All Rights Reserved.Page 17 / 29

AUO T430HVN01.0 SKD CELL液晶玻璃规格书

T430HVN01.0 Product Specification Rev 1.33.5 Power Sequence for LCDParameter t1 t2 t3 t4 t5 t6 t7 t8 t9 t10 t11Values Min. 0.4 0.1 450 0*1Type. -----------------------Max. 30 50 --------*2Unit ms ms ms ms ms ms ms ms ms ms ms0 --500 10 0 450 150*3--50 -------Note: (1) t4=0 : concern for residual pattern before BLU turn off. (2) t6 : voltage of VDD must decay smoothly after power-off. (customer system decide this value) (3) When CMOS Interface signal is N.C. (no connection), opened in Transmitted end, t8 timing spec can be negligible.© Copyright AU Optronics Corp. 2014 All Rights Reserved.Page 18 / 29

AUO T430HVN01.0 SKD CELL液晶玻璃规格书

T430HVN01.0 Product Specification Rev 1.3VCOM Adjust SOPIf you need below pattern or more detail information, please directly contact AUO for engineer service.3.6.1 VCOM I2C Tuning Step3.6.2 Flicker Pattern ■V-stripe Green (L128)3.6.3 WP (Write Protect) Disable Disable □ ■ L H Enable H L Default (NC) H L3.6.4 Adjust SOP© Copyright AU Optronics Corp. 2014 All Rights Reserved. Page 19 / 29