W10G-E451;W02G-E451;W06G-E451;W04G-E451;W01G-E451;中文规格书

W005G thru W10G

Vishay General Semiconductor

Glass Passivated Single-Phase Bridge Rectifier

FEATURES

UL recognition, file number E54214 Ideal for printed circuit boards

Typical IR less than 0.1 µA High case dielectric strength High surge current capability Solder dip 260 °C, 40 s

Component in accordance to RoHS 2002/95/ECand WEEE 2002/96/ECTYPICAL APPLICATIONS

General purpose use in ac-to-dc bridge full waverectification for power supply, adapter, charger,lighting ballaster on consumers and home appliancesapplications.

MECHANICAL DATACase: WOG

Epoxy meets UL 94V-0 flammability rating

Terminals: Silver plated leads, solderable perJ-STD-002 and JESD22-B102E4 suffix for consumer gradePolarity:

As marked on body

PRIMARY CHARACTERISTICS

IF(AV)VRRMIFSMIRVFTJ max.

1.5 A50 V to 1000 V

50 A5 µA1.0 V150 °C

MAXIMUM RATINGS (TA = 25°C unless otherwise noted)

PARAMEMaximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage

Maximum average forward rectified current at 0.375" (9.5 mm) lead length at TA = 25 °C Peak forward surge current single sine-wave superimposed on rated load Rating for fusing (t < 8.3 ms)

Operating junction and storage temperature range

UNIT

VRRMVRMSVDCIF(AV)IFSMI2A2s TJ, TSTG

- 55 to + 150

°C

Document Number: 88769

Revision: 15-Apr-08

For technical questions within your region, please contact one of the following:http://doc.guandang.net

1

W005G thru W10G

Vishay General Semiconductor

ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)

PARAMETER

Maximum instantaneous forward voltage drop per diodeMaximum DC reverse currentat rated DC blocking voltageper diode

Typical junction capacitanceper diode

TEST CONDITIONS1.0 A TA = 25 °C TA = 125 °C 4.0 V, 1 MHz

SYMBOL

UNIT

VFIR

5.0

500

µA

CJTHERMAL CHARACTERISTICS (TA = 25°C unless otherwise noted)

PARAMETypical thermal resistance (1) Note:

(1)Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5 mm) lead length P.C.B. mounting.

P.C.B. size 0.22 x 0.22" (5.5 x 5.5 mm)

RθJARθJL

UNIT

36

11

°C/W

ORDERING INFORMATION (Example)

PREFERRED P/NW06G-E4/51

UNIT WEIGHT (g)

1.12

PREFERRED PACKAGE CODE

51

BASE QUANTITY

100

DELIVERY MODE

Plastic bag

RATINGS AND CHARACTERISTICS CURVES (TA = 25°C unless otherwise noted)

Figure1. Derating Curve Output Rectified Current

Figure2. Maximum Non-Repetitive Peak Forward Surge

Current Per Diode

http://doc.guandang.net2

For technical questions within your region, please contact one of the following:Document Number: 88769

Revision: 15-Apr-08

W005G thru W10G

Vishay General Semiconductor

Figure3. Typical Forward Characteristics Per DiodeFigure

5. Typical Junction Capacitance Per Diode

Figure4. Typical Reverse Leakage Characteristics Per Diode

Figure6. Typical Transient Thermal Impedance

PACKAGE OUTLINE DIMENSIONS in inches (millimeters)

Document Number: 88769Revision: 15-Apr-08

For technical questions within your region, please contact one of the following:http://doc.guandang.net

3

Legal Disclaimer Notice

http://doc.guandang.net

Vishay

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVERELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any otherdisclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose orthe continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and allliability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particularpurpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typicalrequirements that are often placed on Vishay products in generic applications. Such statements are not binding statementsabout the suitability of products for a particular application. It is the customer’s responsibility to validate that a particularproduct with the properties described in the product specification is suitable for use in a particular application. Parametersprovided in datasheets and/or specifications may vary in different applications and performance may vary over time. Alloperating parameters, including typical parameters, must be validated for each customer application by the customer’stechnical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustainingapplications or for any other application in which the failure of the Vishay product could result in personal injury or death.Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree …… 此处隐藏：4866字，全部文档内容请下载后查看。喜欢就下载吧 ……