HDMI 1.4A 版本介绍及生产工艺(2)

冲击

耐久性

N/A

插拔力

ANSI/EIA - 364 13 ANSI/EIA - 364 41C, Condition I

Calbe Flex

HDMI 1.4A brief introduction

HMDI Electrical PerformanceItem 接触阴抗 Test Condition Mated connectors Contact: Dry circuit, 20 mV max, 10m A Shell: Open circuit, 5 V max, 100m A Unmated connectors, aplly 500V AC/ Mated 300V AC(RMS) between adjacent terminal and ground. ( no Breakdown) Unmated connectors, aplly 500V DC/ Mated 150V DC between adjacent terminal and ground. 55oC , Maximum ambient 85 oC , Maximum temperature change 0.5 A Min 40 V AC (RMS.) Continuous max, on any signal pin with respec

t to the shield. ( No Breakdown ) Test unmated each connectors form 1KV to 8 KV in 1 kV steps using 8mm ball probe. Rise tiem ≦ 200 psec ( 10% - 90%) Rise tiem ≦ 200 psec ( 10% - 90%) Refre Std. ANSI/EIA - 364 - 06B

介电强度

ANSI/EIA - 364 20C,method AANSI/EIA - 364 - 21C

绝缘阻抗

接触电流定额

ANSI/EIA - 364 - 70ANA IEC - 801- 2 ANSI/EIA - 364 - 108 ANSI/EIA - 364 - 90

应用电流定额 静电释放 TMDS信号时域 阻抗 TMDS信号时域、 串扰

HDMI 1.4A brief introduction

HMDI Environmental CharacteristicsItem Test Condition10 cycles of: a). - 55 oC for 30 minutes. b). + 85 oC for 30 minutes.

Refre Std.

温度冲击

ANSI/EIA - 364 32C

温湿度

mated connectors together: +25 ~ + 85 oC ,相对湿度: 80 ~ 95%,持继: 4 Cycles (96 H)

ANSI/EIA - 364 - 31B

端子老化

Expose to +105 ± 2 oC for 250 Hours,

ANSI/EIA - 364 - 17B, Condition B, Method A

HDMI 1.4A brief introduction

HMDI Cable Ass’y TMDS Parameters

HDMI 1.4A brief introduction

Type A Receptacle