juniper SRX策略顺序配置

一、web配置

1、建立地址对象

Security——address-Book

2、添加阻塞策略

Security——Policy——Apply Policy

3、配置过滤策略

添加策略关键信息；

此策略为untrust——trust，拒绝源IP为1.1.1.1访问内部任何服务器和应用端口

过滤策略方向；从untrust到trust

调动策略顺序；

二、命令行配置

1、建立地址对象

set security address-book Deny_IP address1.1.1.11.1.1.1/32 set security address-book Deny_IP attach zone untrust 2、建立策略

set security policies from-zone untrust to-zone trust policy Deny_Policy match source-address 1.1.1.1

set security policies from-zone untrust to-zone trust policy Deny_Policy match destination-address any

set security policies from-zone untrust to-zone trust policy Deny_Policymatch application any

set security policies from-zone untrust to-zone trust policy Deny_Policy then deny

3、将策略Deny_Policy移动到default-deny策略之前

insert security policies from-zone untrust to-zone trust policy Deny_Policybefore policy default-deny