安捷伦1200用户手册(2)

Damaged Packaging

If the delivery packaging shows signs of external damage, please call your Agilent Technologies sales and service office immediately. Inform your service representative that the Agilent 1200 Series valve may have been damaged during shipment.

CAUTIONIf there are signs of damage, please do not attempt to install the valve.

Delivery Checklist

Ensure all parts and materials have been delivered with the Agilent 1200 Series valve. The delivery checklists are displayed in Table3 (for G1157A, G1158A, G1159A, G1160A) and in Table4 (for G1162A, G1163A). Please

report missing or damaged parts to your Agilent Technologies sales and service office.

Table 3

Quantity1111

1

1

10

12Delivery checklist for Agilent 1200 Series valves G1157A, G1158A, G1159A and G1160ADescriptionAgilent 1200 Series ValveDeclaration of conformityRail assembly for Column OrganizerAccessory kit containing CAN Cable, 1m long DC-CAN cable Fitting Screw long Fitting Screw extra long5181-15195181-15335065-44545065-9967 (10/pk)Part Number

1

Installation and ConfigurationUnpacking the Agilent 1200 Series valveTable 3Delivery checklist for Agilent 1200 Series valves G1157A, G1158A, G1159A and G1160A (continued)QuantityDescriptionPart Number1 Hex Key 9/64” T-handle8710-23941 Hex Key 3/32”1 wrench8710-05101 socket wrench (Rheotool) 1/48710-2391Table 4Delivery checklist for Agilent 1200 Series micro valves G1162A and G1163AQuantityDescriptionPart Number1Agilent 1200 Series Micro Valve1Declaration of conformity1Rail assembly for Column Organizer5065-44506/10M4 micro valve fittings5065-4410*1M4 micro valve plug5065-4410 1Accessory kit containing1 CAN Cable, 1m long5181-15191 DC-CAN cable5181-15331 Hex Key 9/64” T-handle8710-23941 Hex Key 3/32”1 wrench8710-05101 socket wrench (Rheotool) 1/48710-2391*The consumable kit 5065-4410 contains six M4 micro valve fittings. The consumable kit 5065-4410 contains two M4 micro valve plugs.The M4 micro valve fittings support the Agilent PEEK coated fused silica capillaries (O.D. 0.8mm or 1/32”). The M4 micro valve plug is supplied for pressure (leak) testing.

Installation and Configuration

Unpacking the Agilent 1200 Series valve1

For a list of recommended Agilent PEEK coated fused silica capillaries can be found in the chapter “Capillaries and Fittings for micro valves"on page57.

1Installation and Configuration

Hardware Installation

Hardware Installation

The Agilent 1200 Series valves can be installed in two different ways. They can either be placed on free bench space near the Agilent 1200 Series LC system or they can be mounted on the G1383A Agilent 1200 Series column organizer. The column organizer should be located on the right side of the Agilent 1200 Series stack, which includes the autosampler.In order to install a valve on the G1383A Column Organizer the Organizer Rail Assembly must be installed on the two mounting poles using the clips from the Organizer Rail Assembly. All External Valves have a bracket on the side which slides over the metal part of the Organizer Rail Assembly.Two CAN connectors and one DC-CAN connector are located at the back panel of the valve assemblies as displayed in Figure1.Figure 1Back Panel of the Agilent 1200 Series Valves

Installation and Configuration

Hardware Installation1

Setting up the CAN connection

Connect the CAN-Cable (PN 5181-1519) to one of the CAN ports at back panel of the Agilent 1200 Series valve and to a free CAN-Port on another Agilent 1200 Series module. The second CAN-Port can be used to add additional valves or modules to the HPLC system.

Setting up the power connection to other Agilent 1200 Series LC modules

The power for the Agilent 1200 Series valves can be supplied by one of the following Agilent 1200 Series modules:

Agilent 1200 Series preparative pump (G1361A)

Agilent 1200 Series fraction collectors (G1364A, G1364B, G1364C, G1364D) Agilent 1200 Series high performance autosampler (G1367B)

Agilent 1200 Series micro well-plate autosampler (G1377A)

Agilent 1200 Series dual-loop autosampler PS (G2258A)

Connect the DC-CAN Cable (PN 5181-1533) to the DC-CAN connector at the back panel of the valve and to the DC-CAN connector on one of the Agilent 1200 Series modules listed above.

Setting up the power connection to the external power supply

If none of the Agilent 1200 Series modules from the list above is part of your HPLC system, you have to supply the power through an external power supply (P/N 0950-4422). Plug the DC-CAN adapter from the power supply into the DC-CAN connector on the back panel of your Agilent 1200 Series valve.

1Installation and Configuration

Software Configuration

Software Configuration

The Agilent 1200 Series valves can be controlled by the Agilent ChemStation Rev. A.09.03 or higher.

CAUTIONThe maximum number of all modules (including CAN-slave valves) in your Agilent 1200

Series LC system must not exceed 13.

Contact your local sales and service representative to verify, if your configuration is supported. This is especially important, if the number of module is close to 13.To configure the Agilent 1200 Series valves

StepNote

1Start the Agilent ChemStation

Software.

2Select Configure 1200 Access in the

Instrument menu.

3In the upcoming Configuration dialog The selected green valve icon now box select one or multiple valves and moves from the left Available Modules

panel to the right Configured Modules click Add.panel as displayed in Figure2 on

page15.

4Click OK to leave the Configuration

dialog box.

5After a Restart the Agilent

ChemStation Software a new menu

item Setup Valve now appears in the

Instrument menu.

Installation and Configuration

Software Configur …… 此处隐藏：5221字，全部文档内容请下载后查看。喜欢就下载吧 ……