安捷伦1200用户手册

Agilent 1200 Series

Valves

User Manual

Notices

© Agilent Technologies, Inc. 2006

No part of this manual may be reproduced in

any form or by any means (including elec-

tronic storage and retrieval or translation

into a foreign language) without prior agree-

ment and written consent from Agilent

Technologies, Inc. as governed by United

States and international copyright laws.

Manual Part Number

G1156-90010

Edition

02/06

Printed in Germany

Agilent Technologies

Hewlett-Packard-Strasse 8

76337 Waldbronn, GermanyWarrantyThe material contained in this docu-ment is provided “as is,” and is sub-ject to being changed, without notice, in future editions. Further, to the max-imum extent permitted by applicable law, Agilent disclaims all warranties, either express or implied, with regard to this manual and any information contained herein, including but not limited to the implied warranties of merchantability and fitness for a par-ticular purpose. Agilent shall not be liable for errors or for incidental or consequential damages in connec-tion with the furnishing, use, or per-formance of this document or of any information contained herein. Should Agilent and the user have a separate

written agreement with warranty

terms covering the material in this

document that conflict with these

terms, the warranty terms in the sep-

arate agreement shall control.

Technology Licenses

The hardware and/or software described in

this document are furnished under a license

and may be used or copied only in accor-

dance with the terms of such license.

Restricted Rights Legend

If software is for use in the performance of a

U.S. Government prime contract or subcon-

tract, Software is delivered and licensed as

“Commercial computer software” as

defined in DFAR 252.227-7014 (June 1995),

or as a “commercial item” as defined in FAR

2.101(a) or as “Restricted computer soft-

ware” as defined in FAR 52.227-19 (June

1987) or any equivalent agency regulation or

contract clause. Use, duplication or disclo-

sure of Software is subject to Agilent Tech-

nologies’ standard commercial license

terms, and non-DOD Departments and

Agencies of the U.S. Government will

receive no greater than Restricted Rights as defined in FAR 52.227-19(c)(1-2) (June 1987). U.S. Government users will receive no greater than Limited Rights as defined in FAR 52.227-14 (June 1987) or DFAR 252.227-7015 (b)(2) (November 1995), as applicable in any technical data.Safety NoticesCAUTIONA CAUTION notice denotes a haz-ard. It calls attention to an operat-ing procedure, practice, or the like that, if not correctly performed or adhered to, could result in damage to the product or loss of important data. Do not proceed beyond a CAUTION notice until the indicated conditions are fully understood and met. WARNINGA WARNING notice denotes a hazard. It calls attention to an operating procedure, practice, or the like that, if not correctly per-formed or adhered to, could result in personal injury or death. Do not proceed beyond a WARNING notice until the indicated condi-tions are fully understood and met.

In This Guide…

The Agilent 1200 Series valves provide the user a comprehensive solutions for more flexibility through solvent selection and column selection. They offer new automation capabilities for sample preparation as well as higher sample throughput with alternating column regeneration. The Agilent 1200 Series valves are fully integrated in the CAN environment (control area network) of the Agilent 1200 Series LC system and can be controlled by the Agilent ChemStation Software. The following types of valves will be described in this manual: G1157A Agilent 1200 Series 2 Position/10 Port Valve G1158A Agilent 1200 Series 2 Position/ 6 Port Valve G1159A Agilent 1200 Series 6 Position Selection Valve G1160A Agilent 1200 Series 12 Position/13 Port Selection Valve G1162A Agilent 1200 Series 2 Position/ 6 Port Micro Valve G1163A Agilent 1200 Series 2 Position/10 Port Micro ValveThese valves and the corresponding capillary kits for alternating column regeneration, sample enrichment, sample clean-up, column selection or solvent selection will allow you to implement these applications easily.Chapter1, “Installation and Configuration,” starting on page 7 will describe how to install and configure the Agilent 1200 Series valves.Chapter2, “Operation,” starting on page 17 will describe the Agilent ChemStation valve interface and how to setup the valves in your analytical method.Chapter3, “Maintenance, Repair, and Troubleshooting,” starting on page 25 will describe recommended maintenance and repair procedures as well as troubleshooting tools.

Chapter4, “Valve Applications,” starting on page 39 will

describe common application, e.g. alternating column

regeneration, and how to setup your valves for these

applications.

contents

Contents

1Installation and Configuration

Site Requirements8

9Unpacking the Agilent 1200 Series valve

Damaged Packaging9

Delivery Checklist9

Hardware Installation12

Setting up the CAN connection13

Setting up the power connection to other Agilent 1200 Series LC

modules13

Setting up the power connection to the external power

supply13

Software Configuration

2Operation

Operating the Valve using Agilent ChemStation

Handheld Controller functions

3Maintenance, Repair, and Troubleshooting

Status Indicators26221814

Maintenance and Repair27

Replacing the stator face and the rotor seal for standard valves

(G1157A, G1158A, G1159A, G1160A)28

Replacing the rotor seal for micro valves (G1162A and

G1163A)30

Ear …… 此处隐藏：5577字，全部文档内容请下载后查看。喜欢就下载吧 ……