H3C S3600 交换机WEB管理的实现(含本人配置实例)

H3C S3600 交换机WEB管理的实现(含实例)

H3C S3600 交换机WEB管理的实现

1、用console连接到交换机。

2、配置VLAN1的IP

[H3c]system-view

[H3c]interface-Vlan-interface 1

[H3c interface-Vlan-interface 1]undo ip address

[H3c interface-Vlan-interface 1]ip addree 1.1.1.254 255.255.255.0 quit

3、配置登陆管理的用户名、认证级别、口令

[H3c]local-user "username"

[H3c]service-type telnet level "3"

[H3c]password simple "password"

[H3c]ip route-static “0.0.0.0 0.0.0.0 1.1.1.1”（加个静态路由，可不设置）

[H3c]save“”部分根据自己的需要设置

------------------------------

H3C S3600 打开Web管理

配置管理Vlan

interface vlan-interface 1

undo ip address

ip address 192.168.100.1 24

配置用户认证

local-user admin

service-type telnet level 3

password simple admin

配置静态路由

ip route-static 0.0.0.0 255.255.255.255 192.168.100.254

设置完成后，可以从 http://192.168.100.1 登录交换机进行管理，用户名密码均为Admin

------超级终端设置----

串口波率9600,8,N,1 无 仿真VT100

-------------------------配置实例--------------------------

Starting......

*********************************************************** * * * H3C S3600-28TP-SI BOOTROM, Version 604 *

H3C S3600 交换机WEB管理的实现(含实例)

* * ***********************************************************

Copyright(c) 2004-2010 Hangzhou H3C Technologies Co., Ltd.

Creation date : Mar 9 2010, 19:16:10

CPU Clock Speed : 200MHz

BUS Clock Speed : 33MHz

Memory Size : 64MB

Mac Address : xxxxxxxxxxxx（本人隐藏）

Press Ctrl-B to enter Boot Menu... 0

Auto-booting...

Decompress Image................................................................ ................................................................................ ................................................................................ ................................................................................ ................................................................................ .........................................OK!

Starting at 0x80100000...

User interface aux0 is available.

Press ENTER to get started.

-------------------------加粗字体为手动输入命令--------------------

<H3C>system-view

System View: return to User View with Ctrl+Z.

[H3C]interface vlan-interface 1

[H3C-Vlan-interface1]

%Oct 23 11:19:45:153 2012 H3C L2INF/5/VLANIF LINK STATUS CHANGE:- 1 -

Vlan-interface1 is UP

[H3C-Vlan-interface1]undo ip address

[H3C-Vlan-interface1]ip address 192.168.100.254 24

[H3C-Vlan-interface1]

%Oct 23 11:20:52:795 2012 H3C IFNET/5/UPDOWN:- 1 -Line protocol on the interface Vlan-interface1 is UP

[H3C-Vlan-interface1]quit

[H3C]local-user admin

New local user added.

[H3C-luser-admin]service-type telnet level 3

[H3C-luser-admin]password simple admin

[H3C-luser-admin]quit

[H3C]save

H3C S3600 交换机WEB管理的实现(含实例)

The configuration will be written to the device.

Are you sure?[Y/N]y

Please input the file name(*.cfg)(To leave the existing filename

unchanged press the enter key):

Now saving current configuration to the device.

Saving configuration. Please wait...

....

Unit1 save configuration flash:/config.cfg successfully

%Oct 23 11:44:43:804 2012 H3C CFM/3/CFM_LOG:- 1 -Unit1 saved configuration succe ssfully.

[H3C]