S101C22SS03BE中文资料

C&K S SeriesSlide Switches

Specifications

CONTACT RATING: Q contact material (S1XX, S2XX Models):

6 AMPS @ 125 V AC; 6 AMPS @ 250 V AC; 1 AMP @125 V DC (UL/CSA). (S5XX, S6XX Models): 12 AMPS @

125 V AC; 6 AMPS @ 250 V AC; 1 AMP @ 125 V DC (UL/CSA).(S7XX, S8XX Models): 15 AMPS @ 125 V AC; 6AMPS @250 V AC (UL/CSA). See page J-31 for additional ratings.ELECTRICAL LIFE: 10,000 make-and-break cycles at full load.CONTACT RESISTANCE: Below 10 m typ. initial

@ 2-4 V DC, 100 mA, for both silver and gold plated contacts.INSULATION RESISTANCE: 109 min.

DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.OPERATINGTEMPERATURE: -30ºC to +65ºCSTORAGETEMPERATURE: -30ºC to +85ºC

Materials

HOUSING: 6/6 nylon (UL94V-2), black.TOP PLATE: 6/6 nylon (UL94V-2), black.

ACTUATOR: 6/6 nylon (UL94V-2), black (standard).

CONTACTS: Q contact material: Copper, silver plated. See page

J-31 for additional contact materials.

TERMINALS: Q contact material: Copper, silver plated. See page

J-31 for additional contact materials.

CONTACT SPRING: Music wire or stainless steel.TERMINAL SEAL: Epoxy.

NOTE:Any models supplied with Q, B or G contact material are RoHS compliant.

For the latest information regarding RoHS compliance, please go to: http://www.77cn.com.cn/rohs.NOTE:Specifications and materials listed above are for switches with standard options.For information on specific and custom switches, consult Customer Service Center.

Slide

Build-A-Switch

To order, simply select desired option from each category and place in the appropriate box. Available options are shown anddescribed on pages J–28 through J–31. For additional options not shown in catalog, consult Customer Service Center.

Switch FunctionS101SPST,6 AMPSS202(DPDT,

6 AMPSS802DPDT,15 AMPSS102SPDT,6AMPS

S112SPDT,mom.,6 AMPSS201DPST,6 AMPSS602DPDT,12 AMPSS701SPST,15 AMPSS702SPDT,15 AMPS

Actuator03.335" high04.500" high09.250" high

12Screwdriver slot

(with marking)13Screwdriver slot

(without marking)C2Black capC3Red capC5Yellow cap

Detent

1With detent2Without detent

Mounting Style

SSPanel with mounting earsMSPC thru-hole

S2Snap-in panel with blacktop plateTSPanel with mounting ears

Terminations

03Solder lug with hole02PC Thru-hole04PC Thru-hole07Quick connect08PC Thru-holeWCWire lead

Housing MarkingsNONE No markingsDON-OFFLONMON-OFF

NRed rectangle on one endContact MaterialQSilverBGold

GGold over silver

Seal

NONENo sealEEpoxy seal

Dimensions are shown:Inch(mm)

Specifications and dimensions subject to change

J–27

http://www.77cn.com.cn

C&K S SeriesSlide Switches

Slide

NOTE:and MOM. in table indicates momentary action.All models

with all options when ordered with ‘G’ or ‘Q’ contact material.

Contacts make on side actuator thrown.

03

.335" HIGH

04

.500" HIGH

09

.250" HIGH

12

SCREWDRIVER SLOT(WITH MARKING)

13

SCREWDRIVER SLOT(WITHOUT MARKING)

NOTE:Standard actuator color is black, other colors available, consult Customer Service Center. Alternate heightsare available with ‘03, 04 and 09’ actuators, consult Customer Service Center. Models with S2 mounting style, subtract .090 (2, 29). Actuators ‘12’ and ‘13’ are available with DPST and DPDT models only.

White 115-230 markings (std.).Without markings.

C2; C3; C5

SNAP-ON CAP

OPTION CODE2

C1-CT CAPCOLORBLACKREDYELLOW

NOTE:Actuator finish: matte.

If no color is specified, black will besupplied. Colored actuator caps mayalso be ordered separately and userinstalled, see page J-31.

C2C3C5

Available with S2 mountingstyle only.

Dimensions are shown:Inch(mm)

Specifications and dimensions subject to change

J–28

http://www.77cn.com.cn

C&K S SeriesSlide Switches

12

WITH DETENT

Standard with all maintained models: S101, S102, S201, S202, S602, S701, S702, and S802.WITHOUT DETENT

Standard with all momentary models: S112.

SS

PANEL WITH MOUNTING EARS

AVAILABLE WITH:Models: S101, S102, S112,S201, S202 and S602

Terminations:All except 08Actuators:03, 04, 09, 12*and 13*.

*12 and 13 actuators notavailable with S1XX models.

Slide

MS

PC THRU-HOLE

AVAILABLE WITH:

Models: S101, S102, S112,S201, S202

Terminations:02, 04 and 08

Actuators: 03, 04, 09, 12* and 13**12 and 13 actuators available withS201, S202 and S602 models only.PC MOUNTING

S202031MS02Q

For mounting information, see

TERMINATIONS section, page J-30.

DPDT

S2

SNAP-IN PANEL

PANEL MOUNTING

S802C21S207Q

DPDT

PANEL THICKNESS:

.020(0,57)–.200(5,08)AVAILABLE WITH:

Models:S701, S702,and S802

Terminations: 04, 07, 57 and WCActuators:C2, C3, C5 and 03

Dimensions are shown:Inch(mm)

Specifications and dimensions subject to change

J–29

http://www.77cn.com.cn

C&K S SeriesSlide Switches

TS

PANEL WITH MOUNTING EARS

PANEL MOUNTING

S202031TS03Q

DPDT

Slide

AVAILABLE WITH:

Models:S201, S202, and S602Terminations:All

Actuators:03, 04 and 12.

Dimensions are shown:Inch(mm)

Specifications and dimensions subject to change

J–30

http://www.77cn.com.cn

C&K S SeriesSlide Switches

NONE

NO MARKINGS

D

ON-OFF

L

ON

M

ON-OFF

N

RED RECTANGLE ON ONE END

NOTE:Top plate markings are available with ‘S2’ mounting style only. The marking color

on all top plates with marking options ‘D, L and M’ is white, standard. (except white top plates: markingcolor is black …… 此处隐藏：4044字，全部文档内容请下载后查看。喜欢就下载吧 ……