VMware 2V0-620 Exam中英文对照(4)

QUESTION NO: 34

Which two networking connection types can be configured on a virtual switch? (Choose two.) 哪两个网络连接类型可以在一个虚拟交换机上配置 A. Virtual machine portgroups 虚拟机端口群

B. VMkernel services (such as NFS, iSCSI, or vMotion) to the physical network VMkernel服务(比如NFS、iSCSI或vMotion)物理网络 C. Web services over the Management Network Web服务管理网络

D. NFS and FCoE storage services NFS和FCoE存储服务 Answer: A,B Explanation:

QUESTION NO: 35

An administrator is configuring the Maximum Transmission Unit value on a vSphere Distributed Switch.

管理员正在vSphere分布式交换机上配置最大传输单位值.

Which two options are typical values for ESXi networking? (Choose two.) 拿两个选项是ESXi网络的典型值？ A. 1492 B. 1500 C. 9000 D. 9089

14Answer: B,D Explanation:

QUESTION NO: 36

An administrator needs to monitor traffic on vSwitches in a vSphere 6.x environment. 管理员需要监控vSphere 6. x环境中的阻塞vSwitch 。 Which option, if configured, would accomplish this task? 如果配置,哪个选项完成这项任务 A. Forged Transmits

B. MAC Address Changes MAC地址变换

C. Promiscuous Mode 混合模式

D. Notify Switches Answer: C Explanation:

QUESTION NO: 37

Which two allow for the disabling of Network Rollback operations? (Choose two.) 哪两个允许禁用网络回滚操作？

A. Modifying the vpxd advanded configuration options and adding the config.vpxd.network.rollback key

修改vpxd advanded配置选项和添加配置vpxd.network.rollback key

B. Modifying the C:\\ProgramData\\VMware\\CIS\\cfg\\vmware-vpx\\vpxd.cfg file and adjustingthe xml tag

C. Modifying the C:\\ProgramData\\VMware\\CIS\\cfg\\vmware-vpx\\vpxd.cfg file and adjusting the xml tag D. Modifying the

C:\\ProgramData\\VMware\\CIS\\cfg\\vmware-vpx\\firstboot\\vpxd-service-spec.propfile and adjusting the xml tag Answer: A,B Explanation:

QUESTION NO: 38

What are two ways to identify TCP/IP stack information? (Choose two.) 确定TCP / IP堆栈信息的两种方法是啥？ A. Using the vSphere Web Client 使用vSphere Web客户端

B. Using esxcli network ip netstack 使用esxcli网络ip netstack C. Using esxcfg-netstack 使用esxcfg-netstack D. Using the vSphere Client 使用vSphere客户端 Answer: A,B Explanation:

QUESTION NO: 39

Which two Fibre Channel zoning options are supported with vSphere 6.x? (Choose two.) vSphere x 6.支持哪两个光纤通道分区选项 A. Single-Initiator

B. Single-Initiator-Single-Target C. Multiple-Initiators-Single-Target D. Multiple-Initiators-Multiple-Targets Answer: A,B Explanation:

QUESTION NO: 40

Which two parameters are required when adding an iSCSI target to an iSCSI Software Adapter using Dynamic Discovery? (Choose two.)

当添加一个iSCSI目标到一个iSCSI使用动态发现的软件适配器时需要哪两个参数? A. The iSCSI device's IP Address or Fully Qualified Domain Name iSCSI设备的IP地址或完全限定域名 B. The Port Number 端口号

C. The iSCSI device's iSCSI Qualified Name (IQN) iSCSI设备的iSCSI限定名(IQN) D. The Default Gateway IP Address 默认网关的IP地址 Answer: A,B

Explanation:

QUESTION NO: 41

What is true regarding datastores on ESXi 6.x? 什么是真正可当作ESXi 6. X的数据存储

A. NFS 4.1 datastore does not support Fault Tolerance (FT) 不支持容错(FT)的NFS 4.1数据存储

B. VMFS3 and VMFS5 datastores can be newly created 可以新创建的VMFS3和VMFS5数据存储

C. NFS datastore can be concurrently mounted using NFS 4.1 on one host and NFS on another 可以同时使用NFS4.1挂载在一个主机和NFS在另一个的NFS数据存储 D. NFS 3.0 datastore does not support Fault Tolerance (FT) 不支持容错(FT)的NFSNFS 3.0数据存储 Answer: A Explanation:

QUESTION NO: 42

Which type of Adapter does not require vmkernel networking? 哪种类型的适配器不需要vmkernel网络? A. Independent Hardware iSCSI Adapter 独立硬件的iSCSI适配器

B. Dependent Hardware iSCSI Adapter 依赖硬件iSCSI适配器 C. Software iSCSI Adapter 软件iSCSI适配器

D. Software FCoE Adapter 软件FCoE适配器 Answer: A Explanation:

QUESTION NO: 43

What are two benefits of using NFS 4.1 with vSphere 6.x as compared to NFS 3? (Choose two.) vSphere 6. x使用NFS4.1相比NFS 3 的两个好处是? A. NFS 4.1 supports Kerberos Authentication NFS 4.1 支持Kerberos远程准入 B. NFS 4.1 supports multipathing NFS 4.1 支持多路径 C. NFS 4.1 supports IPv6 NFS 4.1 支持 IPv6

D. NFS 4.1 supports hardware acceleration NFS 4.1 支持硬件加速 Answer: A,B Explanation:

QUESTION NO: 44

Which two storage controller configurations can be used with Virtual SAN? (Choose two.) 哪两个存储控制器配置可用于虚拟SAN? A. SAS controllers in Passthrough mode

透传模下SAS控制器

B. SAS controllers in RAID0 mode RAID0模式下的SAS控制器 C. SAS controllers in RAID1 mode RAID1模式下的SAS控制器

D. SAS controllers in RAID10 mode RAID10模式下的SAS控制器 Answer: A,B Explanation:

QUESTION NO: 45

A company has decided to implement Virtual SAN within their vSphere 6.x environment.

The Virtual SAN cluster will be composed of three ESXi 6.x hosts that are on the Virtual SAN Ready Node list.

公司决定在vSphere 6. x环境实施虚拟SAN。虚拟SAN群将由三个在虚拟SAN ESX Ready Node列表的ESXi 6.x主机组成。 Each ESXi host includes: 每个ESXi主机包括

- Two SAS Controllers that support Passthrough Mode 支持透传模式的两个SAS控制器

- Four Solid State Drives (SSDs) 1TB in size each 四个1 tb大小的固态硬盘(ssd)

- 20 SAS Magnetic Disks (MDs) 1TB in size each 201 tb大小的SAS磁盘(MDs)

- The SSDs and MDs are evenly split between the two SAS controllers ssd和MDs平均分布在两个SAS控制器中

The company will pilot a Virtual SAN cluster utilizing VMware best practices while maximizing storage capacity. The Virtual SAN cluster will use Manual Mode.

公司将试用一个利用VMware最优方法且存储容量最大化的虚拟S …… 此处隐藏：5222字，全部文档内容请下载后查看。喜欢就下载吧 ……