MAX1647EAP规格书,MAX1647EAU技术资料,MAX1648ESE,datasheet,PDF

Datasheet MAX1647 - Chemistry-Independent Battery Chargers - Maxim Integrated Products

19-1158; Rev 0; 12/96

Chemistry-Independent

Battery Chargers

_______________General Description

____________________________Features

The MAX1647/MAX1648 provide the power control neces-sary to charge batteries of any chemistry. In the MAX1647,oCharges Any Battery Chemistry: all charging functions are controlled via the Intel SystemLi-Ion, NiCd, NiMH, Lead Acid, etc.

Management Bus (SMBus ) interface. The SMBus 2-wireoIntel SMBus 2-Wire Serial Interface (MAX1647)serial interface sets the charge voltage and current, andprovides thermal status information. The MAX1647 func-oIntel/Duracell Level 2 Smart Battery Complianttions as a level 2 charger, compliant with the Duracell/Intel(MAX1647)Smart Battery Charger Specification. The MAX1648 omitso4A, 2A, or 1A Maximum Battery-Charge Currentthe SMBus serial interface, and instead sets the chargevoltage and current proportional to the voltage applied too11-Bit Control of Charge Currentexternal control pins.

oUp to 18V Battery VoltageIn addition to the feature set required for a level 2 charger,the MAX1647 generates interrupts to signal the host wheno10-Bit Control of Voltage

power is applied to the charger or a battery is installed oro±0.75% Voltage Accuracy with External ±0.1%removed. Additional status bits allow the host to checkReferencewhether the charger has enough input voltage, andwhether the voltage on or current into the battery is beingoUp to 28V Input Voltage

regulated. This allows the host to determine when lithium-oBattery Thermistor Fail-Safe Protection

ion batteries have completed charge without interrogatingthe battery.

The MAX1647 is available in a 20-pin SSOP with a 2mmprofile height. The MAX1648 is available in a 16-pin SOpackage.

______________Ordering Information

________________________Applications

Notebook ComputersPersonal Digital AssistantsCharger Base StationsPhones

__________________________________________________________Pin Configurations

SMBus is a trademark of Intel Corp.

________________________________________________________________Maxim Integrated Products

1

For free samples & the latest literature: http://doc.guandang.net, or phone 1-800-998-8800

MAX1647/MAX1648

Datasheet MAX1647 - Chemistry-Independent Battery Chargers - Maxim Integrated Products

Chemistry-Independent Battery ChargersMAX1647/MAX1648

ABSOLUTE MAXIMUM RATINGS

DCIN to AGND..........................................................-0.3V to 30VDCIN to IOUT...........................................................-0.3V to 7.5VBST to AGND............................................................-0.3V to 36VBST, DHI to LX............................................................-0.3V to 6VLX to AGND..............................................................-0.3V to 30VTHM, CCI, CCV, DACV, REF,

DLO to AGND................................................-0.3V to (VL + 0.3V)VL, SEL, INT, SDA, SCL to AGND (MAX1647)...........-0.3V to 6VSETV, SETI to AGND (MAX1648)................................-0.3V to 6VBATT, CS+ to AGND.................................................-0.3V to 20V

PGND to AGND.....................................................-0.3V to +0.3VSDA, INTCurrent................................................................50mAVL Current...........................................................................50mAContinuous Power Dissipation (TA= +70°C)

16-Pin SO (derate 8.7mW/°C above +70°C).................696mW20-Pin SSOP (derate 8mW/°C above +70°C)...............640mWOperating Temperature Range

MAX1647EAP, MAX1648ESE...........................-40°C to +85°CStorage Temperature.........................................-60°C to +150°CLead Temperature (soldering, 10sec).............................+300°C

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functionaloperation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure toabsolute maximum rating conditions for extended periods may affect device reliability.

ELECTRICAL CHARACTERISTICS

(VDCIN= 18V, VREF= 4.096V, TA= 0°C to +85°C. Typical values are at TA= +25°C, unless otherwise noted.)

2_______________________________________________________________________________________

Datasheet MAX1647 - Chemistry-Independent Battery Chargers - Maxim Integrated Products

Chemistry-Independent

Battery Chargers

ELECTRICAL CHARACTERISTICS (continued)

(VDCIN= 18V, VREF= 4.096V, TA= 0°C to +85°C. Typical values are at TA= +25°C, unless otherwise noted.)

Note 1:When DCIN is less than 4V, VL is less than 3.2V, causing the battery current to be typically 2µA (CS plus BATT input

current).

_______________________________________________________________________________________

3

MAX1647/MAX1648

Datasheet MAX1647 - Chemistry-Independent Battery Chargers - Maxim Integrated Products

Chemistry-Independent Battery ChargersMAX1647/MAX1648

ELECTRICAL CHARACTERISTICS

(VDCIN= 18V, VREF= 4.096V, TA= -40°C to +85°C. Typical values are at TA= +25°C, unless otherwise noted. Limits over this temperature range are guaranteed by design.)

4

_______________________________________________________________________________________

Datasheet MAX1647 - Chemistry-Independent Battery Chargers - Maxim Integrated Products

Chemistry-Independent

Battery Chargers

TIMING …… 此处隐藏：20294字，全部文档内容请下载后查看。喜欢就下载吧 ……