B340-13-F中文资料

3.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER

Features

Guard Ring Die Construction for Transient Protection Ideally Suited for Automatic Assembly Low Power Loss, High Efficiency Surge Overload Rating to 125A Peak

For Use in Low Voltage, High Frequency Inverters, Free Wheeling, and Polarity Protection Application Lead Free Finish/RoHS Compliant (Note 4)

Dim A B C D E G H J

SMC Min 5.59 6.60 2.75 0.15 7.75 0.10 0.76 2.00

Max 6.22 7.11 3.18 0.31 8.13 0.20 1.52 2.62

Mechanical Data

Case: SMC

Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0

Moisture Sensitivity: Level 1 per J-STD-020C Terminals: Lead Free Plating (Matte Tin Finish). Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band

Marking Information: See Page 3 Ordering Information: See Page 3 Weight: 0.21 grams (approximate)

All Dimensions in mm

* Note: Device may have a semicircular indentation/notch on one side of the device (as shown).

Maximum Ratings and Electrical Characteristics @TA = 25°C unless otherwise specified

Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%.

Characteristic

Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage

Average Rectified Output Current

@ TT =100C°

Symbol VRRM VRWM VRVR(RMS)

IOIFSM

@ IF = 3.0A @ TA = 25°C @ TA = 100°C

VFMIRMCTRθJTRθJATjTSTG

0.50

0.5 20 200 20 90 -55 to +125 -55 to +150

B320 20 14

B330 30 21

B340 40 28 3.0 125

0.70 B350 50 35

B360 60 42

Unit V V A A V mA pF °C/W °C/W °C °C

Non-Repetitive Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Forward Voltage (Note 3)

Peak Reverse Current

at Rated DC Blocking Voltage (Note 3) Typical Capacitance (Note 2)

Typical Thermal Resistance, Junction to Terminal Typical Thermal Resistance, Junction to Ambient (Note 1) Operating Temperature Range Storage Temperature Range

Notes: 1. Thermal Resistance: Junction to terminal, unit mounted on glass epoxy substrate with 2x3mm copper pad 2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 3. Short duration test pulse used to minimize self-heating effect.

4. RoHS revision 13.2.2003. Glass and high temperature solder exemptions applied, see EU Directive Annex Notes 5 and 7.

IFSM, PEAK FORWARD SURGE CURRENT (A)

100

80

60

40

20

01

10

100

NUMBER OF CYCLES AT 60 Hz

Fig. 4 Max Non-Repetitive Peak Forward Surge Current

Ordering Information (Note 5)

Device* B3x0-13-F

Notes:

*

x = Device type, e.g. B320-13-F (SMC package).

Packaging SMC

Shipping

3000/Tape & Reel

5. For Packaging Details, go to our website at http://doc.guandang.net/datasheets/ap02007.pdf.

Marking Information (Note 6)

Notes:

6. Device has a cathode band (as shown above) and may also have a cathode notch (as shown on Page 1).

IMPORTANT NOTICE

Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages.

LIFE SUPPORT

Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated.