《关于作为全球海上遇险和安全系统(GMDSS)组成部分的船载无线电(2)

8.2 Equipment should be so constructed and installed that it is readily accessible for inspection and maintenance purposes.

8.3 Adequate information should be provided to enable the equipment to be properly operated and maintained. The information should: .1 in the case of equipment so designed that fault diagnosis and repair down to component level are practicable, provide full circuit diagrams, component layouts and a component parts list; and

.2 in the case of equipment containing complex modules in which fault diagnosis and repair down to component level are not practicable, contain sufficient information to enable a defective complex module to be located, identified and replaced. Other modules and those

discrete components which do not form part of modules should also meet the requirements of .1 above.

9 MARKING AND IDENTIFICATION

Each unit of the equipment should be marked externally with the following information which should be clearly visible in the normal installation position:

.1 identification of the manufacturer;

.2 equipment type number or model identification under which it was type tested; and

.3 serial number of the unit.