西门子G120变频器BOP操作说明

SINAMICS_BOP-2_en-US

SINAMICS BOP-2

Basic Operator Panel 2

Operating Instructions · March 2010

SINAMICS

SINAMICS_BOP-2_en-US

SINAMICS_BOP-2_en-US

SINAMICS

SINAMICS Basic Operator Panel 2 (BOP-2)

Operating Instructions

Edition 03/2010

2010-03-01 A5E02778927A AB 1 Overview 2 Installation 3 4 Control 5 Diagnostics 6 Parameters 7 Setup 8 Extras 9 Technical data 10

SINAMICS_BOP-2_en-US

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are graded according to the degree of danger. DANGER indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION with a safety alert symbol, indicates that minor personal injury can result if proper precautions are not taken.

CAUTION without a safety alert symbol, indicates that property damage can result if proper precautions are not taken.

NOTICE

indicates that an unintended result or situation can occur if the corresponding information is not taken into

account.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to property damage.

Qualified Personnel

The product/system described in this documentation may be operated only by personnel qualified for the specific task in accordance with the relevant documentation for the specific task, in particular its warning notices and

safety instructions. Qualified personnel are those who, based on their training and experience, are capable of

identifying risks and avoiding potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following: WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

maintenance are required to ensure that the products operate safely and without any problems. The permissible ambient conditions must be adhered to. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of the Siemens AG. The remaining trademarks in this

publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

Siemens AG

Industry Sector

Postfach 48 48

90026 NÜRNBERG

GERMANY order number: A5E02778927A AB 03/2010 Copyright © Siemens AG 2010. Technical data subject to change

SINAMICS_BOP-2_en-US

Table of contents

1 Safety notes...............................................................................................................................................7

Overview....................................................................................................................................................9

Installation...............................................................................................................................................15

Monitoring................................................................................................................................................17

Control.....................................................................................................................................................19

Diagnostics..............................................................................................................................................23

Parameters..............................................................................................................................................29

Setup.......................................................................................................................................................33

Extras......................................................................................................................................................41 Technical data.........................................................................................................................................47 2 3 4 5 6 7 8 9 10

Basic Operator Panel 2 (BOP-2)

Operating Instructions, 2010-03-01, A5E02778927A AB 5

SINAMICS_BOP-2_en-US

Table of contents

6 Basic Operator Panel 2 (BOP-2) Operating Instructions, 2010-03-01, A5E02778927A AB

SINAMICS_BOP-2_en-US

Safety notes

1

WARNING Warnings and cautions

During commissioning of the Inverter it is essential to ensure that the system is in a safe and stable state, as some com …… 此处隐藏：5279字，全部文档内容请下载后查看。喜欢就下载吧 ……