教学文库网 - 权威文档分享云平台
您的当前位置:首页 > 文库大全 > 高等教育 >

温度控制器说明书

来源:网络收集 时间:2026-05-21
导读: 控制温度±0.1度范围。 HTC-1500 / HTC-3000 TEMPERATURE CONTROLLERS 控制温度±0.1度范围。 HTC-1500 / HTC-3000 TEMPERATURE CONTROLLERS 控制温度±0.1度范围。 HTC-1500 / HTC-3000 TEMPERATURE CONTROLLERS 控制温度±0.1度范围。 HTC-1500 / HTC-3000

控制温度±0.1度范围。

HTC-1500 / HTC-3000 TEMPERATURE CONTROLLERS

控制温度±0.1度范围。

HTC-1500 / HTC-3000 TEMPERATURE CONTROLLERS

控制温度±0.1度范围。

HTC-1500 / HTC-3000 TEMPERATURE CONTROLLERS

控制温度±0.1度范围。

HTC-1500 / HTC-3000 TEMPERATURE CONTROLLERS

控制温度±0.1度范围。

HTC-1500 / HTC-3000 TEMPERATURE CONTROLLERS

控制温度±0.1度范围。

HTC-1500 / HTC-3000 TEMPERATURE CONTROLLERS

控制温度±0.1度范围。

HTC-1500 / HTC-3000 TEMPERATURE CONTROLLERS

控制温度±0.1度范围。

HTC-1500 / HTC-3000 TEMPERATURE CONTROLLERS

控制温度±0.1度范围。

HTC-1500 / HTC-3000 TEMPERATURE CONTROLLERS

控制温度±0.1度范围。

HTC-1500 / HTC-3000 TEMPERATURE CONTROLLERS

控制温度±0.1度范围。

HTC-1500 / HTC-3000 TEMPERATURE CONTROLLERS

控制温度±0.1度范围。

HTC-1500 / HTC-3000 TEMPERATURE CONTROLLERS

控制温度±0.1度范围。

HTC-1500 / HTC-3000 TEMPERATURE CONTROLLERS

控制温度±0.1度范围。

HTC-1500 / HTC-3000 TEMPERATURE CONTROLLERS

控制温度±0.1度范围。

HTC-1500 / HTC-3000 TEMPERATURE CONTROLLERS

HTC1500/3000: PCB & HEATSINK MOUNTING

PAGE 15

To mount the HTC Series Hybrid Temperature Controllers HTC-1500 and HTC-3000 to their heatsinks and optional evaluation PCBs, refer to the drawings and instructions below:

MOUNTING INSTRUCTIONS

Begin by applying thermal grease to the back of the HTC to ensure good thermal contact. We recommend Wavelength Electronics part number THERM-PST.

If the HTC evaluation PCB is to be used, feed the pins of the HTC through the cut-out in the evaluation PCB, so that the pins line up with the solder pads on the board with the anges of the HTC on the other side of the PCB. Line up the screw holes on the evaluation PCB, the HTC anges, and the heatsink. Attach with the supplied screws. Once the screws are in place, the HTC can be soldered to the evaluation PCB. Solder each HTC pin to its corresponding pad, taking special care not to short across any of

the solder pads or bend any pins.

If the HTC is to be used without the evaluation PCB, apply the thermal grease as directed, line up the screw holes in the HTC and heatsink and attach with the supplied screws. Connect the HTC pins to your system by soldering them to

the appropriate leads.

控制温度±0.1度范围。

HTC-1500 / HTC-3000 TEMPERATURE CONTROLLERS

…… 此处隐藏:127字,全部文档内容请下载后查看。喜欢就下载吧 ……
温度控制器说明书.doc 将本文的Word文档下载到电脑,方便复制、编辑、收藏和打印
本文链接:https://www.jiaowen.net/wenku/1705175.html(转载请注明文章来源)
Copyright © 2020-2025 教文网 版权所有
声明 :本网站尊重并保护知识产权,根据《信息网络传播权保护条例》,如果我们转载的作品侵犯了您的权利,请在一个月内通知我们,我们会及时删除。
客服QQ:78024566 邮箱:78024566@qq.com
苏ICP备19068818号-2
Top
× 游客快捷下载通道(下载后可以自由复制和排版)
VIP包月下载
特价:29 元/月 原价:99元
低至 0.3 元/份 每月下载150
全站内容免费自由复制
VIP包月下载
特价:29 元/月 原价:99元
低至 0.3 元/份 每月下载150
全站内容免费自由复制
注:下载文档有可能出现无法下载或内容有问题,请联系客服协助您处理。
× 常见问题(客服时间:周一到周五 9:30-18:00)