SAE J2602-1 2005 LIN Network for Vehicle Applications

LIN Network for Vehicle ApplicationsIssued 2004-08Revised 2005-09Superseding J2602-1 AUG2004

SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising therefrom, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be reaffirmed, revised, or cancelled. SAE invites your written comments and suggestions. Copyright © 2005 SAE International

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE.

LIN Network for Vehicle ApplicationsIssued 2004-08Revised 2005-09Superseding J2602-1 AUG2004

3.1.12 3.1.13 3.1.14 3.1.15 4. 5. 5.1 5.2 5.3 5.4 5.4.1 5.4.2 5.4.3 5.5 5.6 5.6.1 5.6.2 5.7 5.7.1 5.7.1.1 5.7.1.2 5.7.1.3 5.7.2 5.7.2.1 5.7.2.2 5.7.2.3 5.7.2.4 5.7.2.5 5.7.2.5.1 5.7.2.5.2 5.7.2.5.3 5.7.3 5.7.3.1 5.7.3.2 5.7.3.3 5.7.4 5.7.4.1 5.7.4.2 5.8 5.8.1 5.8.2 5.8.3 5.8.4 5.8.5 5.8.6 5.8.6.1

Recessive Signal..................................................................................................................10 Request Frame....................................................................................................................10 Slave Node...........................................................................................................................10 Subscriber............................................................................................................................10 Acronyms, Abbreviations, and Symbols..............................................................................10 LIN System Requirements...................................................................................................11 LIN Specification Package...................................................................................................11 J2602 Serial Data Link Characteristics................................................................................11 Detection of Errors by Master (ref Section 4.1, LIN 2.0 Protocol Specification)..................11 Frame Processing by Slave Tasks (ref Section 4.2.2, LIN 2.0 Protocol Specification).......11 Slave Task Error Detection..................................................................................................11 Slave Behavior in the Presence of Errors When Transmitting............................................11 Slave Behavior in the Presence of Errors When Receiving................................................12 Message Transmission Time Tolerance (ref. Section 2.2, LIN 2.0

Protocol Specification).........................................................................................................12 LIN Product Identification (ref. Section 2.4, LIN 2.0 Diag and Config Specification)...........12 Clarification to Function ID Paragraph:................................................................................12 Clarification to Variant ID Paragraph:..................................................................................12 Mandatory Node Configuration Requests (ref. LIN 2.0 Diag and Config Specification)......12 General Configuration Requirements..................................................................................13 Slave Execution of Configuration.........................................................................................13 Slave Device Configuration Capabilities..............................................................................13 Master Configuration Message Pairing................................................................................13 NAD and Message ID Assignment......................................................................................13 NAD Assignment..................................................................................................................13 Message ID Assignment......................................................................................................14 Configuration Messages......................................................................................................16 Response Message to Options 2 and 3 in Section 5.7.2.3..................................................16 DNN Based Broadcast Messages.......................................................................................16 DNN Based Broadcast Message Assignment for 4 Messages per Node...........................16 DNN Based Broadcast Message Assignment for 8 Messages per Node...........................17 DNN Based Broadcast Message Assignment for 16 Messages per Node.........................17 Targeted Reset....................................................................................................................17 Command.............................................................................................................................17 Positive Response...............................................................................................................18 Negative Response..............................................................................................................18 Broadcast Reset...................................................................................................................18 Command.............................................................................................................................18 Response.............................................................................................................................18 Message Format......................... …… 此处隐藏：6952字，全部文档内容请下载后查看。喜欢就下载吧 ……