江西省单级中开泵选型手册,江西省中开双吸泵选型手册(山水泵业)

江西省中开泵，江西省双吸泵，32SAP-10型江西省中开泵报价，江西省双吸泵价格，江西省S中开泵报价，江西省XS型双吸泵价格，江西省单级双吸离心泵，江西省单级双吸离心泵价格江西省双吸离心泵报价，江西省双吸离心泵价格，32SAP-10型江西省SAP水泵。

32SAP-10型SAP型泵系单级双吸水平中开泵，供输送不含固体颗粒物的清水、化学质类似于水的其它液体，介质最高温度不得超过80度，广泛适用于工厂、城市、矿山、电站、农田、水利工程等领域的给排水用泵。

泵型号意义

32SAP—10JA

32—泵进口口径被25除（即进口口径为32X25=800）

SA、SAP—单级双吸中开泵

10—中开泵比转数被10除化整的约数

J—中开泵转速降低

A—双吸泵叶轮外径第一次改变

流量：72~20000 m3/s

扬程：7~186m

技术优势

●水泵两端支承间距短,泵运行稳定,振动噪声小,并可适当升速运行,使水泵适应范围更广.

●进出水口在同一直线上,使管线布置简单方便、美观。

●同一转子可反向运行，降低了水锤引起水泵损坏的风险。

●水泵外型应用工业化设计，线条清晰，符合现代审美观。

成本优势

●选用优异的水力模型，使泵的效率比同类型泵高2-3%，大大降低了泵的运行成本。

●真空高度提高1-3米，从而降低土建投资，延长了使用寿命。

●选用进口轴承，零件材料可根据用户要求选用，使泵能适应各种现场运行条件，大大降低了维修成本。

维修优势

●应用弹性预应力装配，转子部件装拆简单迅速。

●装配时不需调整各种间隙。

TECHNICAL ADV ANTAGE

⒈Type XS pumps work stably with less noise and vibration and can work at a lifting speed due to.Short support at both sides, thus they can be widely used.

⒉The pipelines arrangement of type XS pump looks simple and beautiful due to inlet and outlet at a same center line.

⒊The same rotor of type XS pumps can be operated at reverse direction to avoid damage to the pumps by water hammer.

⒋Unique design of type XS pumps working at high temperature using middle support to fasten the pump casing and using cooling seals oil lubrication bearing then pump suitable for working at 200℃especially for suppling heated water to pipe net system.

5. Type XS pump casting parts can be vertically or horizontally mounted acoording to different working condition, with mechanical seals or packing seals.

6. Type XS pumps look beautiful with visible lines adopting industrially designing.

COST ADV ANTAGE:

1. The efficiency of XS pumps are 2%~3% higher than the same type pumps due to adopting advanced hydraulic model and thus minimum the operating costs.

2. The NPSH of type XS pumps are 1-3 meters lower than the same type split pumps due to using advanced hydraulic model and advanced manufacturing technique and thus minimize the foundation costs and extendling the using life.

3. Type XS pumps are suitable for any site working condition due to using SKF NSK bearing and other parts chosen by the customers and thus minimize the maintenance costs.