EVA5000盘阵和MSL6030磁带库图文安装过程(8)

9) Edit FC Override Settings A) Toggle Port Speed X) Return to previous menu

Command > 9

15、选择9，改光纤端口速率为2Gb

Fibre Channel Configuration Menu 5.6.06 P088R9 262673-002_AA4BLV613FPA 01/10/2005 01:23:07

Current Fibre Channel Configuration - Port 0

FC Link Status : UP/FABRIC

Node Name : 0x100000E0 0202E7C2 Port Name : 0x100000E0 0222E7C2 Port Mode : N_Port Mode

Discovery Mode : Auto Discovery on Link Up Events Buffered Tape Writes : Enabled, Queue Depth = 5 Current Default Map : 'Auto Assigned' Port Speed : 2 GigaBit

Command > x

1) Change World Wide Name High 2) Change World Wide Name Low 3) Toggle Port Mode 4) Change ALPA Value

5) Toggle Discovery Mode 6) Toggle Buffered Tape Writes 7) Change Buffered Tape Queue Depth 8) Change Default Map Value 9) Edit FC Override Settings A) Toggle Port Speed X) Return to previous menu

16、退出

Configuration Menu

5.6.06 P088R9 262673-002_AA4BLV613FPA 01/10/2005 01:24:55

1) Baud Rate Configuration

2) Ethernet and SNMP Configuration 3) Fibre Channel Configuration

4) Parallel SCSI Configuration 5) Device Mapping

6) Trace and Event Settings Configuration 7) Real-Time Clock Configuration 8) Active Fabric Configuration

A) Save Configuration

B) Restore Last Saved Configuration C) Reset to Factory Defaults

X) Return to main menu

Command > x

Saving Configuration, Please Wait...

The configuration has changed and you have not saved the new configuration to flash. The configuration must be saved to flash for it to take effect on the next reboot! Save the configuration now (y/n)? y

17、退出配置系统提示是否对上面的修改做保存，确定保存。

HP Network Storage Router 5.6.06 P088R9 262673-002_AA4BLV613FPA 01/10/2005 01:27:49

Command >4

18、退出到主菜单，选择4重启。

1) Perform Configuration 2) System Utilities

3) Display Trace and Assertion History 4) Reboot

通过web界面管理磁带库

1、方式连接到带库，测试一下带库的机械手和带机，在浏览器的地址栏中输入http://1.1.1.1

2、上面的enternet图标，进行端口配置

3、默认用户名：root 默认密码为：password

4、网口设置为10/100自动适应。、

5、为点serial图标时，设置端口速率，默认为9600，以后可以通过com口调试带库。

6、fibre channel图标进行光纤通道设置，设置performance mode为2 Gigabits，将 FC Port map value 设置为 ‘Auto Assigned’，将Hard AL_PA: enable, 并改变AL_PA的值( AL_PA

124:0xE8 = Loop ID。并设Port Mode: Auto-Sense)