EVA5000盘阵和MSL6030磁带库图文安装过程(7)

4) Clear current trace buffer 5) Clear (flash) assert trace buffer

X) Return to previous menu

Command > 4

6、清除当前的痕迹缓冲，包括以前的错误信息

Trace Dump Menu

5.6.06 P088R9 262673-002_AA4BLV613FPA 01/10/2005 01:17:06

Command > 5

7、清除闪存中的痕迹缓冲，包括以前的错误信息

1) Display trace for current boot cycle 2) Display trace from previous boot cycle 3) Display trace from last assertion failure 4) Clear current trace buffer 5) Clear (flash) assert trace buffer

X) Return to previous menu

Trace Dump Menu

5.6.06 P088R9 262673-002_AA4BLV613FPA 01/10/2005 01:18:51

Command > x 8、退出该菜单

1) Display trace for current boot cycle 2) Display trace from previous boot cycle 3) Display trace from last assertion failure 4) Clear current trace buffer 5) Clear (flash) assert trace buffer

X) Return to previous menu

HP Network Storage Router 5.6.06 P088R9 262673-002_AA4BLV613FPA 01/10/2005 01:19:01

Command > 1

1) Perform Configuration 2) System Utilities

3) Display Trace and Assertion History 4) Reboot

9、性能参数设置

Configuration Menu

5.6.06 P088R9 262673-002_AA4BLV613FPA 01/10/2005 01:19:51

Command > 2

1) Baud Rate Configuration

2) Ethernet and SNMP Configuration 3) Fibre Channel Configuration 4) Parallel SCSI Configuration 5) Device Mapping

6) Trace and Event Settings Configuration 7) Real-Time Clock Configuration 8) Active Fabric Configuration

A) Save Configuration

B) Restore Last Saved Configuration C) Reset to Factory Defaults

X) Return to main menu

10、网络和SNMP设置，修改默认的IP地址。

Ethernet Configuration Menu 5.6.06 P088R9 262673-002_AA4BLV613FPA

01/10/2005 01:20:02

IP Address : 1.1.1.1 [STATIC] Subnet Mask : 255.255.255.0 IP Gateway : 0.0.0.0

Ethernet Physical Address : 00:E0:02:E2:E7:C2 Ethernet Mode : 10/100Mbps (Auto-Neg) Hostname : Router DHCP Configuration : Disabled

Command > 1

Enter new IP Address > 1.1.1.1

1) Change IP Address 2) Change IP Subnet Mask 3) Change IP Gateway

4) Change Ethernet Physical Address 5) Toggle Ethernet Mode 6) Change Hostname

7) Toggle DHCP Configuration 8) Change SNMP Settings 9) Change Security Settings

X) Return to previous menu

11、选择1，更改IP地址，输入IP地址后直接回车

Ethernet Configuration Menu 5.6.06 P088R9 262673-002_AA4BLV613FPA 01/10/2005 01:20:57

IP Address : 1.1.1.1 [STATIC] Subnet Mask : 255.255.255.0 IP Gateway : 0.0.0.0

Ethernet Physical Address : 00:E0:02:E2:E7:C2 Ethernet Mode : 10/100Mbps (Auto-Neg) Hostname : Router DHCP Configuration : Disabled

1) Change IP Address 2) Change IP Subnet Mask 3) Change IP Gateway

4) Change Ethernet Physical Address 5) Toggle Ethernet Mode 6) Change Hostname

7) Toggle DHCP Configuration 8) Change SNMP Settings 9) Change Security Settings

X) Return to previous menu

Command > 2

Enter new Subnet Mask > 255.255.255.0

12、选择2，更改子网掩码为255.255.255.0，直接回车。

Ethernet Configuration Menu 5.6.06 P088R9 262673-002_AA4BLV613FPA 01/10/2005 01:22:17

IP Address : 1.1.1.1 [STATIC] Subnet Mask : 255.255.255.0 IP Gateway : 0.0.0.0

Ethernet Physical Address : 00:E0:02:E2:E7:C2 Ethernet Mode : 10/100Mbps (Auto-Neg) Hostname : Router DHCP Configuration : Disabled

Command > 6

Enter new hostname > MSL6030

1) Change IP Address 2) Change IP Subnet Mask 3) Change IP Gateway

4) Change Ethernet Physical Address 5) Toggle Ethernet Mode 6) Change Hostname

7) Toggle DHCP Configuration 8) Change SNMP Settings 9) Change Security Settings

X) Return to previous menu

13、选择6，更改带库的主机名字，输入MSL6030即可

Configuration Menu

5.6.06 P088R9 262673-002_AA4BLV613FPA 01/10/2005 01:23:02

Command > 3

1) Baud Rate Configuration

2) Ethernet and SNMP Configuration 3) Fibre Channel Configuration 4) Parallel SCSI Configuration 5) Device Mapping

6) Trace and Event Settings Configuration 7) Real-Time Clock Configuration 8) Active Fabric Configuration

A) Save Configuration

B) Restore Last Saved Configuration C) Reset to Factory Defaults

X) Return to main menu

14、选择3，更改光纤通道的速率和一些其他参数

Fibre Channel Configuration Menu 5.6.06 P088R9 262673-002_AA4BLV613FPA 01/10/2005 01:23:07

Current Fibre Channel Configuration - Port 0

FC Link Status …… 此处隐藏：2454字，全部文档内容请下载后查看。喜欢就下载吧 ……