高分子材料与工程专业英语翻译(4)

高分子专业英语选讲课文翻译资料

流动状态以及根据流动面的自由与否，通常包括剪切、延伸和挤压流动。

The thermo-mechanical history experienced by the polymer during flow and solidification results in the development of microstructure (morphology, crystallinity, and orientation distributions) in the manufactured article. The ultimate properties of the article are closely related to the microstructure. Therefore, the control of the process and product quality must be based on an understanding of the interactions between resin properties, equipment design, operating conditions, thermo-mechanical history, microstructure, and ultimate product properties. Mathematical modeling and computer simulation have been employed to obtain an understanding of these interactions. Such an approach has gained more importance in view of the

expanding

utilization

of

computer

aided

design/computer

assisted

manufacturing/computer aided engineering (CAD/CAM/CAE) systems in conjunction with plastics processing.

经历了流动和固化（或冷却）的聚合物热机械过程导致了制造业微结构的变革（形态学、结晶学和取向分布）。最终产品的性能与微结构紧密相关。因此，加工和产品质量的控制必须基于树脂性能、设备设计、操作条件、热机械过程、微结构和最终产品性能之间相互作用的理解。数学模型和计算机被同时用于获得这些相互作用的理解。鉴于进一步利用计算机辅助设计/计算机辅助制造/计算机辅助工程（CD/CAM/CAE）系统协同塑料加工诸如这一趋近获得了更多的重要性。

The following discussion will highlight some of the basic concepts involved in plastics shaping operations. It will emphasize recent developments relating to the analysis and simulation of some important commercial processes, with due consideration to elucidation of both thermo-mechanical history and microstructure development. More extensive reviews of the subject can be found in standard references on the topic (1~6).

下面的讨论将重点放在包括塑料成型操作一些基本概念上。适当考虑说明热机械过程和微结构发展，将强调最近关于分析和一些重要商品加工模型的进展。在上端（1～6）的标准参考中能够找到本主题更广泛的综述。

As mentioned above, shaping operations involve combinations of fluid flow and heat transfer, with phase change, of a visco-elastic polymer melt. Both steady and unsteady state processes are encountered. A scientific analysis of operations of this type requires solving the relevant equations of continuity, motion, and energy (i.e. conservation equations).

如上面提到的，成型操作包括液体流动和热传递，对于相态变化，还包括粘弹性聚合物的熔融。稳定和非稳定状态加工是相冲突的。这种典型操作的科学分析需要解决相关连续、运转和能量平衡（如守恒方程）。

—

Austarita G , Nicolas L. Polymer prscessing and properties

New York: Plenum press 1984, 1~3

UNIT 29 Synthetic Plastics

第二十九单元 合成塑料

It would be difficult to visualise our modern world without plastics. Today they are an

15

—

高分子专业英语选讲课文翻译资料

integral part of everyones lifestyle with applications varying from commonplace articles to sophisticated scientific and medical instruments. Nowadays designers and engineers readily turn to plastics because they offer combinations of properties not available in any other materials. Plastics offer advantages such as lightness , resilience , resistance to corrosion , colour fastness , transparency , ease of processing , etc. , and although they also have their limitations , their exploitation is limited only by the ingenuity of the designer.

现代社会没有塑料真是难以想象。今天它们是组成每个人生活的必备部分，从不断变化的平凡物品到尖端科技的医学仪器。当今的设计师和工程师已开始着手塑料的研究，因为它们提供了不能应用于任何其它材料的综合性能。塑料所呈现的优点诸如质轻、弹性、防腐、不易褪色、透明性、易于加工等等，尽管也有它们的制约，它们的开发仅因设计师的创造力受到限制。

It is usual to think that plastics are a relatively recent development but in fact, as part of the larger family called “polymers”, they are a basic ingredient of plant and animal life. Polymers are materials which consist of very long chain-like molecules. Natural materials such as silk, shellac, bitumen, rubber and cellulose have this type of structure. However, it was not until the 19th century that attempts were made to develop a synthetic polymeric material and the first success was based on cellulose. This was a material called “Parkesine”, after its inventor Alexander Parkes, and although it was not a commercial success it was a start and eventually led to the development of “Celluoid”. This material was an important break-through because it became established as a good replacement of natural materials which were in short supply .

通常认为塑料是一种相对新的发展，但事实上作为 “聚合物”大家族的成员，它们是动植物生活的一个基本组成部分。聚合物是由象链一样非常长的分子组成的材料。象丝、虫胶、沥青、橡胶和纤维素之类的天然材料有这种类型的结构。然而，直到19世纪才尝试开发了一种合成聚合物材料，首次成功基于赛璐珞。这是一种叫做“硝化纤维素塑料”的材料，它的发明者是Alexander Parkes ,尽管不是一种开始的商业成功，最终导致了“赛璐珞”的发展。这种材料是一个重要的突破因为它成为了供应短缺的天然材料的良好替代品。

During the early twentieth century there was considerable interest in these new synthetic materials. Phenol-formaldehyde (“bakelite”) was introduced in 1905 and about the time of the second World War materials such as nylon, polyethylene and acrylic (“Perspex”) appeared on the scene. Unfortunately many of the early applications for plastics earned them a reputation as being cheap substitutes. It has taken them a long time to overcome this image but nowadays the special properties of plastics are being appreciated which is establishing them as important materials in thei …… 此处隐藏：7508字，全部文档内容请下载后查看。喜欢就下载吧 ……