171473J160C-F中文资料

元器件交易网http://www.77cn.com.cn

Type 171 Radial Leaded Metallized Polypropylene

Type 171 radial leaded, box, metallized polypropylene capacitors are available in ve pitch sizes and have a ame retardant case and epoxy encapsulant that meets UL94V-0. The Type 171 is an excellent choice for applications requiring low dielectric losses, high in-sulation resistance in an AC or DC environment. The polypropylene direlectric gives this capacitor excellent pulse rise time (dv/dt) performance.

Radial Box Metallized Polypropylene Capacitors

Highlights

High dv/dtLow leakage

Radial leaded (7.5, 10, 15, 22.5, 27.5 mm pitch)Flame retardant case and encapsulant meets UL94V-0

Non-inductively wound

Speci cations

Capacitance Range:

Voltage Range:

Capacitance Tolerance:

Operating Temperature Range:

RoHS Compliant

0.0022 to 3.3 µF

160 to 630 Vdc (90 to 250 Vac, 60 Hz)±5%, ±10%, ±20%

–55 ºC to +105 ºC (derate linearly to 50% rated

voltage from 85 ºC to 105 ºC)

Dielectric Withstand Voltage:1.6 x rated voltage for 2 s @ +25 ºC ±5 ºC

Dissipation Factor (DF): tgδ x 10–4 at +25 ºC ±5 ºC

kHz10C ≤0.1 µF0.1 µF <C ≤1 µF≤10≤20C >1 µF

—Insulation Resistance:100,000 MΩ x µF, 200,000 MΩ Min.

Self Inductance:Pitch (mm)

7.58

109

1510

22.518

27.518

Life Test:

Damp Heat Test:

Soldering:

Long Term Storage Stability:

Maximum Pulse Rise Time dv/dt (V/µ):

L (nH) ≈

2000 hrs @ 85 ºC 1.25 x Vn95% RH @ +40 ºC for 56 days260 ºC ±5 ºC for 10 s ±1 sΔC/C ≤ ±0.5% after 2 years

Lead Spacing (Pitch)

Vn160250400630

7.55.5153555

104

112030

15271015

22.51.545.58

27.51357

If the working voltage (V) is less than the nominal voltage (Vn), the capaci-tor can work at higher dv/dt . In this case, the maximum value allowed is obtained by multiplying the above value (See table dv/dt) with the ratio Vn/V

CDE Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8561 Fax: (508)996-3830 http://www.77cn.com.cn

元器件交易网http://www.77cn.com.cn

Type 171 Radial Leaded Metallized Polypropylene

Outline Drawing

Ratings

Cap(µF)

Inches (mm)

Catolog Part Number

L Max0.413 (10.5)0.413 (10.5)

T Max0.157 (4.0)0.157 (4.0)0.157 (4.0)0.197 (5.0)0.197 (5.0)0.197 (5.0)0.236 (6.0)0.236 (6.0)0.236 (6.0)0.197 (5.0)0.236 (6.0)0.236 (6.0)0.335 (8.5)

H Max0.374 (9.5)0.374 (9.5)0.374 (9.5)0.433 (11.0)0.433 (11.0)0.433 (11.0)0.472 (12.0)0.472 (12.0)0.472 (12.0)0.433 (11.0)0.472 (12.0)0.531 (13.5)0.591 (15.0)0.669 (17.0)

S (Pitch)0.295 (7.5)0.295 (7.5)0.394 (10)0.295 (7.5)0.394 (10.0)0.295 (7.5)0.394 (10.0)0.295 (7.5)0.394 (10)0.591 (15.0)0.591 (15.0)0.591 (15.0)0.886 (22.5)0.886 (22.5)0.886 (22.5)1.083 (27.5)1.083 (27.5)0.295 (7.5)0.295 (7.5)0.394 (10)0.394 (10)0.394 (10)0.394 (10)

Ød0.024 (0.6)0.024 (0.6)0.024 (0.6)0.024 (0.6)

RoHS Compliant

ESR (mΩ)IRMS (Amps)20 kHz to

100 kHz25 ºC45 ºC85 ºC

160 Vdc / 90 Vac 60 Hz

0.033171333*160B-F 0.047171473*160B-F

0.047171473*160C-F 0.512 (13.0)0.068171683*160C7-F 0.413 (10.5)0.068171683*160D-F 0.512 (13.0)0.10.10.150.150.220.330.470.681.01.52.23.3

171104*160C7-F 0.413 (10.5)171104*160E-F 171154*160E-F 171224*160F-F

0.512 (13.0)0.512 (13.0)0.709 (18.0)

171154*160D7-F 0.413 (10.5)

Not applicable. These capacitance values are not

0.024 (0.6)customarily used in switched-mode power supplies0.024 (0.6)0.024 (0.6)0.024 (0.6)0.024 (0.6)0.031 (0.8)0.031 (0.8)0.031 (0.8)0.031 (0.8)0.031 (0.8)0.031 (0.8)0.031 (0.8)0.031 (0.8)0.024 (0.6)0.024 (0.6)

Not applicable. These

0.024 (0.6)capacitance values are not 0.024 (0.6)customarily used in switched-mode power supplies

0.024 (0.6)0.024 (0.6)

373326201816

3.74.15.56.16.37.4

3.13.54.75.15.76.4

1.41.62.63.13.33.6

171334*160G-F 0.709 (18.0)171684*160L -F171105*160N-F 171225*160P-F

1.043 (26.5)1.043 (26.5)1.26 (32.0)

171474*160H-F 0.709 (18.0) 0.295 (7.5)

171155*160O-F 1.043 (26.5)171335*160Q-F 1.26 (32.0)

0.413 (10.5)0.413 (10.5)

0.394 (10.0)0.748 (19.0)0.433 (11.0)0.787 (20.0)0.512 (13.0)0.886 (22.5)0.157 (4.0)0.157 (4.0)0.157 (4.0)0.157 (4.0)0.197 (5.0)0.236 (6.0)

0.374 (9.5)0.374 (9.5)0.374 (9.5)0.374 (9.5)0.433 (11.0)0.472 (12.0)

250 Vdc / 90 Vac 60 Hz

0.015171153*250B-F 0.022171223*250B-F

0.022171223*250C-F 0.512 (13.0)0.033171333*250C-F 0.512 (13.0)0.047171473*250D-F 0.512 (13.0)0.068171683*250E-F

0.512 (13.0)

* indicates capacitance tolereance, J = ±5%, K = ±10%, M = ±20%

CDE Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8561 Fax: (508)996-3830 http://www.77cn.com.cn

元器件交易网http://www.77cn.com.cn

Type 171

Radial Leaded Metallized Polypropylene

RoHS Compliant

Ratings

CDE Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8561 Fax: (508)996-3830 http://www.77cn.com.cn