UFGS 02 66 10 Test Fill

UFGS 02 66 10 Test Fill

**************************************************************************USACE / NAVFAC / AFCESA / NASA UFGS-02 66 10 (February 2010) -----------------------------Preparing Activity: USACE Superseding UGGS-02 66 10 (April 2006)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated January 2012**************************************************************************SECTION TABLE OF CONTENTSDIVISION 02 - EXISTING CONDITIONS

SECTION 02 66 10

TEST FILL

02/10PART 1 GENERAL 1.1 REFERENCES

1.2 SYSTEM DESCRIPTION

1.3 SUBMITTALS

1.4 QUALITY ASSURANCE

PART 2 PRODUCTS 2.1 RANDOM FILL 2.2 CLAY BARRIER LAYER

2.3 GEOMEMBRANE

2.4 GEOSYNTHETIC CLAY LINER

2.5 GEOSYNTHETIC DRAINAGE LAYER

2.6 GEOTEXTILE

2.7 GRANULAR DRAINAGE LAYER

2.8 SELECT FILL

2.9 EQUIPMENT

PART 3 EXECUTION 3.1 GENERAL 3.1.1 Location

3.1.2 Size

3.1.3 Slope

3.2 PLACEMENT

3.2.1 Clearing and Grubbing

3.2.2 Subgrade Compaction

3.2.3 Drainage Controls

3.2.4 Anchor Trench

3.2.5 Test Fill Placement

3.2.6 Survey Control Points

3.2.7 Permanent Bench Mark

3.3 TESTS

3.3.1 Random Fill Tests

3.3.2 Clay Barrier Layer Tests

UFGS 02 66 10 Test Fill

3.3.3 Geosynthetics Tests 3.3.4 Granular Drainage Layer Tests 3.3.5 Select Fill Tests

3.3.6 Surveys

3.3.7 Post-Construction Monitoring

3.3.8 Weekly Reports

3.3.9 Final Geosynthetics Inspection

3.3.10 Final Report

3.4 APPROVAL

3.5 REMOVAL

-- End of Section Table of Contents --

UFGS 02 66 10 Test Fill

**************************************************************************USACE / NAVFAC / AFCESA / NASA UFGS-02 66 10 (February 2010) -----------------------------Preparing Activity: USACE Superseding UGGS-02 66 10 (April 2006)

UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated January 2012

**************************************************************************

SECTION 02 66 10

TEST FILL02/10

**************************************************************************

NOTE: This guide specification covers the

requirements for a test fill for a landfill liner or

cover.Adhere to UFC 1-300-02 Unified Facilities Guide Specifications (UFGS) Format Standard when editing

this guide specification or preparing new project

specification sections. Edit this guide

specification for project specific requirements by

adding, deleting, or revising text. For bracketed

items, choose applicable items(s) or insert appropriate information.Remove information and requirements not required in

respective project, whether or not brackets are

present.

Comments, suggestions and recommended changes for

this guide specification are welcome and should be

submitted as a Criteria Change Request (CCR).

**************************************************************************PART 1 GENERAL**************************************************************************

NOTE: This guide specification must be used in

conjunction with and coordinated with the referenced

sections. Multiple borrow sources may be required for large projects; in that case, more than one test fill may need to be constructed. Test fills are

generally listed as a lump sum item on the bidding

schedule.

**************************************************************************

1.1 REFERENCES

**************************************************************************

NOTE: This paragraph is used to list the

publications cited in the text of the guide

specification. The publications are referred to in

UFGS 02 66 10 Test Fill

the text by basic designation only and listed in

this paragraph by organization, designation, date,

and http://www.77cn.com.cne the Reference Wizard's Check Reference feature

when you add a RID outside of the Section's

Reference Article to automatically place the

reference in the Reference Article. Also use the

Reference Wizard's Check Reference feature to update the issue dates.

References not used in the text will automatically

be deleted from this section of the project specification when you choose to reconcile references in the publish print process.**************************************************************************The publications listed below form a part of this specification to the extent referenced. The publications are referred to within the text by the basic designation only.

ASTM INTERNATIONAL (ASTM)ASTM D1556ASTM D2167ASTM D2216ASTM D422ASTM D4318ASTM D4643(2007) Density and Unit Weight of Soil in Place by the Sand-Cone Method(2008) Density and Unit Weight of Soil in Place by the Rubber Balloon Method(2010) Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass(1963; R 2007) Particle-Size Analysis of Soils(2010) Liquid Limit, Plastic Limit, and Plasticity Index of Soils(2008) Determination of Water (Moisture) Content of Soil by the Microwave Oven Method

(2010) Measurement of Hydraulic

Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter(2010) Standard Test Method for In-Place

Density and Water Content of Soil and

Soil-Aggregate by Nuclear Methods (Shallow

Depth)ASTM D5084ASTM D6938

1.2 SYSTEM DESCRIPTIONSubmit a const …… 此处隐藏：23243字，全部文档内容请下载后查看。喜欢就下载吧 ……