H3C 华为 01-AAA命令详解(8)

[Sysname-radius-radius1] data-flow-format data kilo-byte packet kilo-packet

2.1.6 display radius scheme

【命令】

display radius scheme [ radius-scheme-name ] 【视图】

任意视图 【缺省级别】

2：系统级 【参数】

radius-scheme-name：指定RADIUS方案名。 【描述】

display radius scheme命令用来显示所有或指定RADIUS方案的配置信息。 需要注意的是：如果不指定RADIUS方案名，则显示所有RADIUS方案的配置信息。 相关配置可参考命令radius scheme。 【举例】

# 显示所有RADIUS方案的配置信息。

display radius scheme

------------------------------------------------------------------ SchemeName : radius1

Index : 0 Type : extended Primary Auth Server:

IP: 1.1.1.1 Port: 1812 State: block Primary Acct Server:

IP: 1.1.1.1 Port: 1813 State: block Second Auth Server:

IP: N/A Port: 1812 State: block Second Acct Server:

IP: N/A Port: 1813 State: block Auth Server Encryption Key : 123

Acct Server Encryption Key : Not configured

Accounting-On packet disable, send times : 5 , interval : 3s Interval for timeout(second) : 3 Retransmission times for timeout : 3 Interval for realtime accounting(minute) : 12 Retransmission times of realtime-accounting packet : 5 Retransmission times of stop-accounting packet : 500 Quiet-interval(min) : 5

Username format : without-domain Data flow unit : Byte Packet unit : one ------------------------------------------------------------------ Total 1 RADIUS scheme(s).

表2-1 display radius scheme命令显示信息描述表

字段 SchemeName Index Radius方案的名称 Radius方案的索引号 描述 字段 Type Primary Auth Server Primary Acct Server Second Auth Server Second Acct Server IP Radius服务器的类型 主认证服务器 主计费服务器 从认证服务器 从计费服务器 描述 主认证/计费服务器IP地址 未配置时，显示为N/A 主认证/计费服务器接入端口号 未配置时，显示缺省值 主认证/计费服务器目前状态 Port State ? active：激活 ? block：阻塞 Auth Server Encryption Key Acct Server Encryption Key Accounting-On packet disable send times interval Interval for timeout(second) Retransmission times for timeout Interval for realtime accounting(minute) Retransmission times of realtime-accounting packet Retransmission times of stop-accounting packet Quiet-interval(min) Username format Data flow unit Packet unit Total 1 RADIUS scheme(s). 认证服务器的共享密钥 计费服务器的共享密钥 accounting-on功能未使能 accounting-on报文的重发次数 accounting-on报文的重发间隔（秒） 超时时间(秒) 超时重发次数 实时计费间隔(分钟) 实时计费报文重发次数 无响应停止计费报文重发次数 主服务器恢复激活状态的时间 用户名格式 流量数据的单位 数据包的单位 共计1个RADIUS方案

2.1.7 display radius statistics

【命令】

display radius statistics 【视图】

任意视图

【缺省级别】

2：系统级 【参数】

无 【描述】

display radius statistics命令用来显示RADIUS报文的统计信息。 相关配置可参考命令radius scheme。 【举例】

# 显示RADIUS报文的统计信息。

display radius statistics state statistic(total=1024):

DEAD = 1024 AuthProc = 0 AuthSucc = 0 AcctStart = 0 RLTSend = 0 RLTWait = 0 AcctStop = 0 OnLine = 0 Stop = 0

Received and Sent packets statistic:

Sent PKT total = 1547 Received PKT total = 23 RADIUS received packets statistic: Code = 2 Num = 15 Err = 0 Code = 3 Num = 4 Err = 0 Code = 5 Num = 4 Err = 0 Code = 11 Num = 0 Err = 0

Running statistic:

RADIUS received messages statistic:

Normal auth request Num = 24 Err = 0 Succ = 24 EAP auth request Num = 0 Err = 0 Succ = 0 Account request Num = 4 Err = 0 Succ = 4 Account off request Num = 503 Err = 0 Succ = 503 PKT auth timeout Num = 15 Err = 5 Succ = 10 PKT acct_timeout Num = 1509 Err = 503 Succ = 1006 Realtime Account timer Num = 0 Err = 0 Succ = 0 PKT response Num = 23 Err = 0 Succ = 23 Session ctrl pkt Num = 0 Err = 0 Succ = 0 Normal author request Num = 0 Err = 0 Succ = 0 Set policy result Num = 0 Err = 0 Succ = 0 RADIUS sent messages statistic: Auth accept Num = 10 Auth reject Num = 14 EAP auth replying Num = 0 Account success Num = 4 Account failure Num = 3 Server ctrl req Num = 0 RecError_MSG_sum = 0 SndMSG_Fail_sum = 0 Timer_Err = 0 Alloc_Mem_Err = 0 State Mismatch = 0 Other_Error = 0

No-response-acct-stop packet = 1

Discarded No-response-acct-stop packet for buffer overflow = 0

表2-2 display radius statistics命令显示信息描述表

字段 state statistic(total=18000) 描述 状态统计（总数=18000） 字段 DEAD AuthProc AuthSucc AcctStart RLTSend RLTWait AcctStop OnLine Stop Received and Sent packets statistic Sent PKT total Received PKT total RADIUS received packets statistic Code Num Err Running statistic RADIUS received messages statistic Normal auth request EAP auth request Account request Account off request PKT auth timeout PKT acct_timeout Realtime Account timer PKT response Session ctrl pkt Normal author request Succ Set policy result RADIUS sent messages statistic Auth accept 空闲态用户数 认证等待态用户数 认证成功态用户数 计费开始态用户数 实时计费发送态用户数 实时计费等待态用 …… 此处隐藏：3843字，全部文档内容请下载后查看。喜欢就下载吧 ……