教室智能照明控制系统

河南工业职业技术学院

毕业设计任务书

类别：三年制高职 专业：电子信息工程 班级：电子信息0801 姓名：宋洪江

毕业设计题目：教室智能照明系统 指导教师姓名：马瑛

负责人签字：

2011年 05 月 20 日

设计题目：教室智能照明系统

一、 设计要求：

设计一个教室智能照明控制系统，通过多种传感器采集室内光线、人数分布等信息，利用控制电路调节照明强度，实现节能控制。

二、 设计任务

1. 画出电路原理图

2. 编写设计说明书，1万5千字以上。包括：

（1） （2） （3） （4）

设计任务书 前言 目录

正文，包括：

设计思想、电路工作原理、元器件选择、电力元器件参数、使用元器件明细表、总结、参考资料等

3.B5版面，正文5号或小4字号，章标题小2加粗，节标题小4加粗。

基于单片机的照明控制系统设计与实现

摘要

随着电子技术的飞速发展，基于单片机的控制系统已广泛应用于工业、农业、电力、电子、智能楼宇等行业，微型计算机作为嵌入式控制系统的主体与核心，代替了传统的控制系统的常规电子线路。同时楼宇智能化的发展与成熟，也为基于单片机的照明控制系统的普及与应用奠定了坚实的基础。

本文介绍了基于AT89C51的室内灯光控制系统及其原理，提出了有效的节能控制方法。该系统采用了当今比较成熟的传感技术和计算机控制技术，利用多参数来实现对学校教室室内照明的控制。

系统设计包括硬件设计和软件设计两部分。该照明控制系统的主控制器、分控制器分别是以AT89C51单片机为基础，实现了通信、控制与显示等功能。文中详细地描述了控制电路的设计过程，包括：键盘与LED显示电路、RS485通信电路、照明灯控制电路以及看门狗电路等。对于软件设计主要有主控制器、分控制器的有线通信程序设计以及灯光控制、定时控制、键盘扫描与LED显示等程序设计。

关键词：灯光控制系统；AT89C51；单片机；节能；采集电路

Abstract

The Control System for Lighting Based on Single–chip Microcomputer

Abstract

With the rapid development of electronic technology, the system of control based on Single-chip Microcomputer is widely applied in industry, agriculture, electric power, electron, intelligent building and so on. Microcomputer, as the subject and core of the embedded system of control, replaces the traditional system—electronic circuit. At the same time, the development and maturation of the intelligent building have established the substantial foundation for the popularization and application of the control system for lighting based on single-chip microcomputer。

In this paper,the Indoor Lighting Control System Based on AT89C51 and its principle are introduced. Some effective and energy saving control strategys of lighting system are brought forward. The current system uses a relatively mature sensor technology and computer control technology ，using multi-parameter to achieve the school classroom indoor lighting control.

The system includes hardware and software design in two parts. The host controller of the control system for lighting is based on AT89C51 single-chip microcomputer, and the auxiliary ones are based on AT89c51. The system can do many jobs, such as wired communication, wireless data transmitting, controlling and display. The paper describes the designing process of the circuit at length, including: keyboard and LED display circuit, RS485 communication circuit, wireless transmitting circuit, control circuit of lighting, watchdog circuit, etc. The designing of software mainly includes the several programming, such as wired communication, lamplight controlling, timed controlling, keyboard scanning and LED displaying. The wired communication programming function is that through Master-slave communication method based on RS485 the host controller sends orders to

I

Abstract

the all auxiliary controllers or each one, including: turning on lighting, turning off lighting, regulating brightness of lighting, controlling timed lighting, etc.

Key words:lighting control system;AT89C51; Single-chip microcomputer；energy saving;acquisition of signal

II