T510E687M035AGE030中文资料

元器件交易网http://www.77cn.com.cn

SOLID TANTALUM CHIP CAPACITORS

T510 SERIES—High Capacitance-Low ESR

Ultra Low ESR < 30 mΩ

New E/7260 Case with ESR < 18 mΩUp to 5 Amps ripple current

RoHS Compliant & Leadfree Termination (see

www. http://www.77cn.com.cn for lead transitions)Operating Temperature: -55 C to +125 C

CATHODE (-) END

SIDE VIEW

FEATURES

100% accelerated steady-state aging100% Surge current test

Precision - molded, laser-marked caseSymmetrical compliant terminationsTaped and reeled per EIA 481-1

OUTLINE DRAWING

ANODE (+) END

BOTTOM VIEW

antalum Surface Mount

Option,T510 RATINGS & PART NUMBER REFERENCE

DC DC ESRCapLeakage DF %ESRRipple CurrentCaseKEMETLeakageDF %

mRipple CurrentµFSizePart NumberµA @@ +25°CmΩArms @ +25°C,120Hz@ +25°C100 kHz, maxCapCaseµFSizeKEMET

+25°C100 kHzPart NumberµA @ @ +25°CΩ@ +25°CArms @ +25°C,+25°C120Hz100 kHz, maxMaxMax MaxMaxMax

100 kHz

4 Volt Rating at +85°C (2.7 Volt Rating at 125°C)Max680.0XT510X687(1)004A(2)E03027.26.0303.02.71.2100.0XT510X107(1)020A(2)E03520.08.035.07.7

6.93.11000.0XT510X108(1)004A(2)E01840.06.0183.91.5100.0X2.62.31.01000.0XT510X108(1)004A(2)E02340.03.5T510X107(1)020A(2)E04020.06.040.06.0233.43.01.31000.0ET510E108(1)004A(2)E01840.06.0184.03.61.625 Volt Rating at +85°C (17 Volt Rating at 125°C)1000.0ET510E108(1)004A(2)E01040.06.0105.34.82.16/6.3 Volt Rating at +85°C (4 Volt Rating at 125°C)100.0ET510E107(1)025A(2)E05025.08.050

2.42.11.0470.0XT510X477(1)006A(2)E03028.26.035 Volt Rating at +85°C (23 Volt Rating at 125°C)680.0XT510X687(1)006A(2)E02342.8303.02.71.222.0XT510X226(1)035A(2)E1007.76.01001.61.40.66.0233.43.11.4680.0ET510E687(1)006A(2)E02340.86.0233.53.21.422.0XT510X226(1)035A(2)E0807.76.0801.81.70.7680.0ET510E687(1)006A(2)E01240.86.0124.84.31.922.0XT510X226(1)035A(2)E0607.76.060

2.11.90.810 Volt Rating at +85°C (7 Volt Rating at 125°C)33.0XT510X336(1)035A(2)E06511.66.0652.01.80.8330.0XT510X337(1)010A(2)E03533.06.033.0XT510X336(1)035A(2)E05011.66.050

2.32.10.916 Volt Rating at +85°C (11 Volt Rating at 125°C)352.82.51.147.0XT510X476(1)035A(2)E05516.58.055

2.22.00.9150.0XT510X157(1)016A(2)E03047.0XT510X476(1)035A(2)E06516.58.065

2.01.80.824.06.0150.0XT510X157(1)016A(2)E0402.42.11.024.0303.02.71.247.0ET510E476(1)035A(2)E05016.58.050220.0XT510X227(1)016A(2)E0406.0402.62.31.050 Volt Rating at +85°C (33 Volt Rating at 125°C)35.210.0402.62.31.0220.0XT510X227(1)016A(2)E02535.210.0253.33.01.310.0XT510X106(1)050A(2)E1205.08.0120

1.51.30.610.0XT510X106(1)050A(2)E0905.08.090

1.7

1.6

0.7

(1) To complete KEMET part number insert "K" - ±10% or "M" - ±20% capacitance tolerance. (2) To complete KEMET part number, insert H (SnPb) or T - 100% tin.T510 ORDERING INFORMATION

This termination code not available

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300

effective 15 July 2007.

41

T diloS

元器件交易网http://www.77cn.com.cn

SOLIDTANTALUM CHIP CAPACITORS

T510 SERIES—High Capacitance

TYPICAL ESR/Z FREQUENCY SCAN @25 C

CAPACITOR ALTERNATE MARKINGS

T510

CAPACITOR MARKINGS

“514” = The 14th week

of 2005.

42

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300

元器件交易网http://www.77cn.com.cn

TANTALUM AND ALUMINUM CHIP CAPACITORS

Packaging Information

Labeling:Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes.

Refer to EIA-556.

QUANTITIESPACKAGEDPERREEL

Case CodeKEMETEIAR2012-12S3216-12T3528-12U6032-15W7343-15V7343-20A3216-18B3528-21C6032-28D7343-31Y7343-40X7343-43E7260-38

Tape

Width-mm

888121212881212121212

7" Reel*2,5002,5002,5001,0001,0001,0002,0002,000500500500500500

13" Reel*10,00010,00010,0005,0003,0003,0009,0008,0003,0002,5002,0002,0002,000

* No c-spec required for 7" reel packaging. C-7280 required for 13" reel packaging.92

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300

元器件交易网http://www.77cn.com.cn

TANTALUM, CERAMIC ANDALUMINUM CHIP CAPACITORS

Packaging Information

Performance Notes

1.Cover Tape Break Force: 1.0 Kg Minimum.

2.Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:

Tape WidthPeel Strength

8 mm0.1 Newton to 1.0 Newton (10g to 100g)12 mm0.1 Newton to 1.3 Newton (10g to 130g)

The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carriertape shall be 165 to 180 from the plane of the carrier tape. During peeling, the carrier and/or cover tapeshall be pulled at a velocity of 300 ±10 mm/minute.

3.Reel Sizes:Molded tantalum capacitors are available on either 180 mm (7") reels (standard) or 330 mm (13")reels (with C-7280). Note that 13” reels are preferred.

http://www.77cn.com.cnbeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes.Refer to EIA-556.

Embossed Carrier Tape Configuration: Figure 1

Table 1 — EMBOSSEDTAPEDIMENSIONS (Metric will govern)

元器件交易网http://www.77cn.com.cn

TANTALUM, CERAMIC ANDALUMINUM CHIP CAPACITORS

Packaging Information

Embossed Carrier Tape Configuration (cont.)

20°

Sketch D: Tape Camber (Top View)

400mm (15.75) Min.

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-630095